________________________________________________________________________________

John Deere 5320 Maintenance Information

John Deere 5320 Service Intervals

Every Ten Hours or Daily Checks

Engine oil level checking procedure. If the engine oil level is low, fill in fresh oil.

Transmission/hydraulic oil level checking procedure. When transmission/hydraulic oil is low, add recommended volume.

Checking engine air filters. Install a new filters if required.

Check engine coolant level. If the coolant level is low, top it up.

Check engine idling, steering unit, service brakes and parking brake. Repair any malfunctions if necessary.

Oil And Filter Change

Every 250 hours

Changing engine oil. Motor oil type: Plus-50, SAE 15W-40, 10W-40, 5W-30, 5W-40. API Service Category CH-4, CG-4, CF-4. How much is required: Engine Oil Capacity: 8.5 L (2.2 gal). After installing a new filter, check that the engine oil level is correct.

Change engine oil filter. Filter part number - T19044. When changing the filter, clean the dirt inside the filter housing. When the filter is replaced, check the oil level. Add oil if necessary.

Check cab recirculation air filter. Clean if necessary. Cab air filter part number - RE73220/RE195491.

Inspect cab fresh air filter. Service as required. Part number - RE198488.

Engine primary air filter checking. Clean as required. Engine primary air filter part number: AT171853.

Inspect engine secondary air filter. Change as required. Part number - AT171854.

Changing hydraulic/transmission filter element. Hydraulic/transmission filter part number: RE45864. After installing a new filter, check the hydraulic/transmission fluid level. Add fluid if necessary.

Every 500 hours

Replace fuel filter. Fuel filter element part number: RE60021. Check diesel fuel pump performance.

Check in-line fuel strainer. Replace as required. Part number - RE220719.

Change front axle lubricant. Front axle oil - GL-5. Front Axle Oil Capacity - 6.2 L (1.6 gal).

Every 1200 hours

Hydraulic/transmission fluid change. Fluid type - Hy-Gard, JDM J20C or J20D. How much is required: Transmission and Hydraulic Capacity for Dry Clutch (CollarShift and SyncShuttle) - 38 L (10 gal), for Wet Clutch (PowrReverser) - 43.5 L (11.5 gal). After replacing the hydraulic/transmission fluid, check the level with a dipstick.

Annual Maintenance

John Deere 5320 replacement parts

Engine Primary Air Filter. Part Number: AT171853
Engine Secondary Air Filter Element. Part Number: AT171854
Engine Oil Filter. Part Number: T19044
Engine Fuel Filter. Part Number: RE60021
Engine Inline Fuel Strainer. Part Number: RE220719
Transmission/Hydraulic Filter Element. Part Number: RE45864
Cab Fresh Air Filter. Part Number: RE198488
Cab Recirculation Air Filter. Part Number: RE73220/RE195491

Change engine oil and filter. Service lubrication system components.

Install a new engine primary/secondary air cleaner elements.

Install a new transmission/hydraulic filter.

Change transmission/hydraulic oil.

Change the fuel filter by first drain water from fuel tank.

Change cab fresh air filter.

Replace cab recirculation air filter.

Clean radiator and oil cooler fins.

Flush the cooling system and add fresh coolant. Cooling System Capacity - 9.5 L (2.5 gal).

Inspect all clamps hoses and hoses.

Check battery charging.

Check engine valve clearance.

Check and adjust fuel pump.