________________________________________________________________________________

John Deere 6210 Maintenance Information

John Deere 6210 Service Intervals

Every Ten Hours or Daily Checks

Check motor oil level. If after checking the engine oil level is low, top it up.

Transmission/hydraulic oil level checking. When the transmission/hydraulic fluid is low, add fresh oil.

Checking engine air filters. Replace with a new one if necessary.

Check radiator coolant level. If the coolant level is low, add it.

Check engine idle speed, steering system, service brakes and parking brake. Repair any malfunctions if necessary.

Oil Change And Filter Replacement

Every 250 hours

Change engine oil. Recommended engine oil: Plus-50, SAE 15W-40, 10W-30, 5W-30. API Service Category CJ-4, CI-4, CH-4. Lubricating system capacity: 12 L (3.2 gal). Fill with the new oil up to the upper notch on the dipstick.

Replacing engine oil filter. Engine oil filter part number: RE59754. When change the filter, cleaning the housing is recommended. After installing a new filter, check the oil level. If necessary, add it.

Every 300 hours

Engine primary air filter checking. Clean as required. Engine primary air filter part number: AL78223.

Check cab recirculation air filter. Clean if necessary. Cab air filter part number - AL71259.

Every 500 hours

Change primary fuel filter. Fuel filter part number - RE509208.

Replace final fuel filter. Part number - RE62419. Check diesel fuel pump operation.

Replace cab activated carbon filter. Never clean. Part number: L156235 and L156236.

Every 750 hours

Transmission fluid filter replacement. Transmission filter part number - AL156625. After installing a new filter, check the transmission/hydraulic oil. Add transmission/hydraulic fluid if it is low.

Changing hydraulic filter element. Hydraulic filter element part number - AL156625/RE34958. When the filter is replaced, check the transmission/hydraulic oil level. Add transmission/hydraulic oil if it is low.

Replace front PTO oil filter. Part number: L114404.

Every 1500 hours

Changing transmission/hydraulic fluid. Recommended fluid type: Hy-Gard, JDM J20C, JDM J20D. How much to change: Transmission and Hydraulic System Capacity for Models with SyncroPlus Transmission - 52 L (13.7 gal), for Models with PowrReverser Transmission - 52 L (13.7 gal), for Models with PowrQuad Transmission - 49 L (12.9 gal). After changing the transmission/hydraulic fluid, check the level with a dipstick.

Change cab fresh air filter. Air filter part number - AL177185/AL177184.

Replace cab recirculation air filter element. Part number - AL71259.

Replace engine primary air filter. Part number: AL78223.

Replace engine secondary air filter. Part number: AL78224.

Front axle fluid change. Front Axle Capacity: w/o TLSTM - 5 L (1.3 gal), with TLSTM - 6 L (1.6 gal). Front axle oil: Hy-Gard.

Annual Maintenance

John Deere 6210 replacement parts

Engine Primary Air Filter. Part Number: AL78223
Engine Secondary Air Filter Element. Part Number: AL78224
Engine Oil Filter. Part Number: RE59754
Engine Primary Fuel Filter. Part Number: RE509208
Engine Final Fuel Filter. Part Number: RE62419
Transmission Oil Filter. Part Number: AL156625
Hydraulic Oil Filter. Part Number: AL156625/RE34958
Front PTO Oil Filter. Part Number: L114404
Cab Fresh Air Filter. Part Number: AL177185/AL177184
Cab Recirculation Air Filter. Part Number: AL71259
Cab Activated Carbon Filter. Part Number: L156235 and L156236

Replace filter and engine oil. Service lubrication system components.

Install a new engine primary and secondary air cleaner elements.

Change transmission filter.

Change hydraulic filter.

Change hydraulic/transmission fluid.

Drain water from fuel tank and change fuel filters.

Install a new cab fresh air filter.

Install a new cab recirculation air filter.

Replace cab activated carbon filter.

Change front PTO oil filter.

Clean oil cooler fins and radiator.

Drain, flush and refill cooling system. Cooling System Capacity: Tractors with Cab - 13.5 L (3.6 gal), w/o Cab - 11 L (2.9 gal).

Inspect all hoses and clamps.

Check battery electrolyte level.

Adjust engine valve clearance.

Inspect and adjust diesel injector pump.