________________________________________________________________________________

John Deere 4410 Maintenance Information

John Deere 4410 Periodic Maintenance

Every Ten Hours or Daily Checking

Check engine oil level. If the engine oil level is low, add fresh oil.

Check the hydraulic/transmission oil level. When the hydraulic/transmission fluid is low, fill the required volume.

Check engine primary and secondary air filter element. Replace if necessary.

Check the coolant level in cooling system. If the coolant level is low, add it.

Check idle engine speed, steering unit, parking brake and service brakes. Repair any damage if necessary.

Oil And Filter Change

Every 200 Hours

Changing engine oil. Motor oil type: Plus-50, SAE 15W-40, 10W-30, 5W-40. API Service Category CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4. Oil system capacity: 4.3 L (1.14 gal). Check engine oil level after replacement.

Replacing engine oil filter. Engine oil filter part number: M806419. When change the filter, cleaning the housing is recommended. When the filter is replaced, check the oil level. Add oil if required.

Transmission/hydraulic fluid change (eHydro). Recommended transmission/hydraulic oil: Low Viscosity Hy-Gard, J20D. Transmission and Hydraulic Fluid Capacity: 26 L (6.9 gal). After replacing the transmission/hydraulic fluid, check the level with a dipstick.

Change suction side filter (eHydro). Part number - LVA11522.

Change transmission/hydraulic fluid filter (eHydro). Fluid filter part number - LVA10419. After installing a new filter, check the transmission/hydraulic fluid level. If after checking the transmission oil level is low, add it.

Every 400 hours

Transmission/hydraulic fluid change (ePowrReverser). Recommended oil: Low Viscosity Hy-Gard, J20D. How much to change: Transmission and Hydraulic Capacity - 24 L (6.3 gal). After replacing the transmission/hydraulic fluid, check the level with a dipstick.

Change suction side filter (ePowrReverser). Part number - LVA11522.

Perform transmission/hydraulic filter element replacement (ePowrReverser). Part number of transmission/hydraulic filter element - AM102723. Check the transmission/hydraulic oil level after installing a new filter element. Add fluid if necessary.

Every 500 Hours

Replace fuel filter. Fuel filter part number - M801101. Check injection pump settings.

Change front axle fluid. Front axle oil - Low Viscosity Hy-Gard. Front Axle Capacity - 4.5 L (1.19 gal).

Check engine primary air filter elements. Change if necessary. Air filter part number - M131802.

Inspect engine secondary air filter element. Replace as required. Part number - M131803.

Yearly Maintenance

John Deere 4410 replacement parts

Engine Primary Air Filter. Part Number: M131802
Engine Secondary Air Filter. Part Number: M131803
Engine Oil Filter. Part Number: M806419
Engine Fuel Filter. Part Number: M801101
Transmission/Hydraulic Oil Filter (eHydro). Part Number: LVA10419 and LVA11522
Transmission/Hydraulic Oil Filter. Part Number (ePowrReverser): AM102723 and LVA11522
Alternator Belt. Part Number: LVU11659

Change engine oil and filter. Service lubrication system components.

Change air filter elements.

Change transmission/hydraulic fluid.

Replace transmission/hydraulic filter.

Replace suction side filter.

Change the fuel filter by first drain water from fuel tank.

Clean radiator and oil cooler fins.

Drain, flush and refill cooling system. Cooling System Capacity - 5.7 L (1.51 gal).

Inspect all hoses and clamps.

Check battery charging.

Adjust engine valve clearance.

Check and adjust fuel injectors.