________________________________________________________________________________

John Deere 4510 Inspection and Maintenance

John Deere 4510 Maintenance Intervals

Every Ten Hours or Daily Inspection

Check motor oil level. If the engine oil level is low, fill in fresh oil.

Check transmission/hydraulic oil level. When the transmission/hydraulic fluid is low, fill the required volume.

Checking engine air filter elements. Replace with a new one if necessary.

Check radiator coolant level. If the coolant level is low, add it.

Check engine idling, steering, service brakes and parking brake. Repair any damage if required.

Oil Change And Filter Replacement

Every 200 Hours

Change engine oil. Recommended oil - Plus-50, SAE 15W-40, 10W-30, 5W-40. API Service Category CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4. How much is needed: Engine Oil Capacity - 4.8 L (1.27 gal). After installing a new filter, check that the engine oil level is correct.

Replace oil filter. Engine oil filter part number: M806419. Before replacement procedure, clean the filter housing from dirt. Check the oil level after installing a new filter. If required, add it.

Replace transmission/hydraulic oil. Transmission/hydraulic oil type - Low Viscosity Hy-Gard, J20D. Transmission fluid capacity: 36.9 L (9.7 gal). After completing the filling procedure, check transmission/hydraulic oil level.

Replace transmission/hydraulic oil filter. Transmission/hydraulic fluid filter part number: LVA10419. When installation is complete, check the transmission/hydraulic oil level. Add oil if required.

Replace suction side filter. Part number of suction side filter - LVA11522.

Every 500 Hours

Change fuel filter. Fuel filter part number - T111383. Check the efficiency of fuel injection pump.

Change front axle oil. Front Axle Capacity - 5 L (1.32 gal). Front axle oil - Low Viscosity Hy-Gard.

Check engine primary air filter elements. Change if necessary. Air filter part number - M131802.

Inspect engine secondary air filter element. Replace as required. Part number - M131803.

Annual Maintenance

John Deere 4510 replacement parts

Engine Primary Air Filter. Part Number: M131802
Engine Secondary Air Filter. Part Number: M131803
Engine Oil Filter. Part Number: M806419
Engine Fuel Filter. Part Number: T111383
Transmission/Hydraulic Oil Filter. Part Number: LVA10419 and LVA11522
Alternator Belt. Part Number: LVU11661/LVU11662

Change engine oil and filter. Check and clean the lubrication system.

Replace air cleaner elements.

Install a new transmission/hydraulic filter and pour in fresh transmission/hydraulic fluid.

Replace suction side filter.

Drain water from fuel tank and replace fuel filters.

Clean oil cooler fins and radiator.

Flush the cooling system and refill with fresh coolant. Cooling System Capacity - 6.1 L (1.61 gal).

Check all hoses and clamps.

Check battery electrolyte level.

Adjust engine valve clearance.

Inspect and adjust diesel injector pump.