________________________________________________________________________________

John Deere 6410 Maintenance Data

John Deere 6410 Service Intervals

Every Ten Hours or Daily Checking

Check engine oil level. If the oil level is too low, fill in new oil.

Transmission/hydraulic fluid level checking. If the transmission/hydraulic fluid is too low, add it.

Check engine primary/secondary air filters. Replace if necessary.

Check engine coolant level. If the coolant level is too low, fill the system.

Check engine speed, steering, hand brake and service brakes. If malfunctions are found, repair it.

Oil Change And Filter Replacement

Every 250 hours

Engine oil change. Recommended engine oil: Plus-50, SAE 15W-40, 10W-30, 5W-30. API Service Category CJ-4, CI-4, CH-4. How much to pour: Engine Oil Capacity - 12 L (3.2 gal). Check motor oil level after changing.

Change engine oil filter. Engine oil filter part number: RE59754. Before replacing, remove dirt from the filter housing. Check the oil level after installing a new filter. Add oil if it is low.

Every 300 hours

Engine primary air filter checking. Clean as required. Engine primary air filter part number: AL78223.

Check cab recirculation air filter. Clean if necessary. Cab air filter part number - AL71259.

Every 500 hours

Replace primary fuel filter. Fuel filter part number - RE509208.

Change final fuel filter. Part number - RE62419. Check diesel fuel pump operation.

Replace cab activated carbon filter. Never clean. Part number: L156235 and L156236.

Every 750 hours

Change front PTO oil filter. Part number: L114404.

Replacing transmission oil filter. Oil filter part number: AL156625. Check the transmission/hydraulic fluid level after installing a new filter. Add oil if required.

Perform hydraulic filter replacement. Hydraulic filter part number: AL156625/RE34958. Check the transmission/hydraulic oil level after installing a new filter element. Add transmission/hydraulic oil if it is low.

Every 1500 hours

Change transmission/hydraulic fluid. Oil type - Hy-Gard, JDM J20C, JDM J20D. Transmission/hydraulic fluid capacity: SyncroPlus Transmission - 52 L (13.7 gal), PowrReverser Transmission - 52 L (13.7 gal), PowrQuad Transmission - 49 L (12.9 gal). When the procedure is complete, check the transmission/hydraulic oil level.

Replace engine primary air filter. Part number: AL78223.

Replace engine secondary air filter. Part number: AL78224.

Change cab fresh air filter. Air filter part number - AL177185/AL177184.

Replace cab recirculation air filter element. Part number - AL71259.

Front axle oil change. Front Axle Capacity: Without TLSTM - 5 L (1.3 gal), With TLSTM - 6 L (1.6 gal). Front axle oil: Hy-Gard.

Yearly Maintenance

John Deere 6410 replacement parts

Engine Primary Air Filter. Part Number: AL78223
Engine Secondary Air Filter Element. Part Number: AL78224
Engine Oil Filter. Part Number: RE59754
Engine Primary Fuel Filter. Part Number: RE509208
Engine Final Fuel Filter. Part Number: RE62419
Transmission Oil Filter. Part Number: AL156625
Hydraulic Oil Filter. Part Number: AL156625/RE34958
Front PTO Oil Filter. Part Number: L114404
Cab Fresh Air Filter. Part Number: AL177185/AL177184
Cab Recirculation Air Filter. Part Number: AL71259
Cab Activated Carbon Filter. Part Number: L156235 and L156236

Replace filter and engine oil. Service lubricating system components.

Change engine air cleaner elements.

Change transmission/hydraulic fluid.

Replace transmission filter.

Replace hydraulic filter.

Change the fuel filters (primary/final), but drain water from fuel tank first.

Install a new front PTO oil filter.

Install a new cab recirculation air filter.

Change cab fresh air filter.

Change cab activated carbon filter.

Clean radiator and oil cooler fins.

Drain, flush and refill engine cooling system. Cooling System Capacity: 13.5 L (3.6 gal) for Models w/Cab and 11 L (2.9 gal) for for Models w/o Cab.

Check all clamps hoses and hoses.

Check and service the battery.

Adjust engine valve clearance.

Check and adjust fuel injection nozzle.