________________________________________________________________________________

John Deere 4710 Maintenance Data

John Deere 4710 Maintenance Intervals

Every Ten Hours or Daily Inspection

Engine oil level checking procedure. If the engine oil level is low, add fresh oil.

Transmission/hydraulic oil level checking. If transmission/hydraulic oil is too low, add recommended volume.

Check engine air filter. Install a new filter elements if necessary.

Check coolant level in radiator. If the coolant level is low, add it.

Check engine speed, steering system, service brakes and hand brake. Repair any malfunctions if necessary.

Oil Change And Filter Replacement

Every 200 hours

Engine oil change. Motor oil type: Plus-50, SAE 15W-40, 10W-30, 5W-40. API Service Category CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4. How much is required: Engine Oil Capacity- 4.8 L (1.27 gal). After adding engine oil, check the level with a dipstick.

Oil filter changing. Oil filter part number: M806419. Before replacing, remove dirt from the filter housing. Check the oil level after installing a new filter. Add oil if required.

Transmission/hydraulic oil change. Recommended fluid type: Low Viscosity Hy-Gard, J20D. Transmission and Hydraulic Capacity: Models with ePowrReverser - 36.9 L (9.7 gal), Models with eHydro - 35 L (9.2 gal). After adding transmission/hydraulic fluid, check the level with a dipstick.

Change transmission/hydraulic fluid filter. Oil filter part number: LVA10419. When the filter is replaced, check the transmission/hydraulic oil level. If after checking the transmission fluid level is low, add it.

Replace suction side filter. Suction side filter part number - LVA11522. Add fluid if necessary.

Every 500 Hours

Check engine primary air filter elements. Change if necessary. Air filter part number - M131802.

Inspect engine secondary air filter element. Replace as required. Part number - M131803.

Change engine fuel filter. Engine fuel filter part number: T111383. Check diesel fuel pump performance.

Front axle oil change. Front Axle Capacity - 5 L (1.32 gal). Front axle oil - Low Viscosity Hy-Gard.

Yearly Maintenance

John Deere 4710 replacement parts

Engine Primary Air Filter. Part Number: M131802
Engine Secondary Air Filter. Part Number: M131803
Engine Oil Filter. Part Number: M806419
Engine Fuel Filter. Part Number: T111383
Transmission/Hydraulic Oil Filter. Part Number: LVA10419 and LVA11522
Alternator Belt. Part Number: LVU11661/LVU11662

Replace filter and engine oil. Check and clean the lubrication system.

Change engine primary and secondary air filter elements.

Change transmission/hydraulic oil.

Install a new transmission/hydraulic filter.

Replace suction side filter.

Replace the fuel filter, but drain water from fuel tank first.

Clean radiator and oil cooler fins.

Flush the cooling system and refill with fresh coolant. Cooling System Capacity - 6.4 L (1.69 gal).

Check all hoses and clamps.

Check level of battery electrolyte.

Adjust engine valve clearance.

Check and adjust fuel injectors.