________________________________________________________________________________

John Deere 4310 Maintenance Data

John Deere 4310 Maintenance Intervals

Every 10 Hours or Daily Inspection

Check engine oil level. If after checking the oil level is low, add it.

Transmission/hydraulic oil level checking. If transmission/hydraulic oil is too low, fill in new oil.

Check engine primary/secondary air filters. Replace if necessary.

Check the coolant level in cooling system. If the coolant level is too low, add coolant in cooling system.

Check idle engine speed, steering system, hand brake and service brakes. Repair any damage if required.

Oil Change And Filter Replacement

Every 200 Hours

Changing engine oil. Recommended engine oil type: Plus-50, SAE 15W-40, 10W-30, 5W-40. API Service Category CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4. How much to fill: Engine Oil Capacity - 4.3 L (1.14 gal). After completing the filling procedure, check motor oil level.

Changing oil filter. Filter part number - M806419. When installing a new filter, flush the filter housing from dirt. Check the oil level after installing a new filter. If required, add it.

Changing transmission/hydraulic fluid (Hydrostatic). Transmission/hydraulic oil type - Low Viscosity Hy-Gard, J20D. Transmission and Hydraulic Capacity (Hydrostatic Models): 26 L (6.9 gal). After changing the transmission/hydraulic oil, check the level with a dipstick.

Change transmission/hydraulic fluid filter (Hydrostatic). Fluid filter part number - LVA10419. Check the transmission/hydraulic oil level after installing a new filter. Add transmission oil if it is low.

Change suction side filter (Hydrostatic). Part number - LVA11522.

Every 400 hours

Changing transmission/hydraulic fluid (SyncShift/PowrReverser). Oil type - Low Viscosity Hy-Gard, J20D. Transmission and Hydraulic Capacity (Gear Models): 24 L (6.3 gal). After changing the transmission/hydraulic oil, check the level with a dipstick.

Perform transmission/hydraulic filter element replacement (SyncShift/PowrReverser). Part number of transmission/hydraulic filter: AM102723. After installing a new filter, check the transmission/hydraulic fluid level. If after checking the oil level is low, add it.

Change suction side filter (SyncShift/PowrReverser). Part number - LVA11522.

Every 500 hours

Replace fuel filter. Fuel filter element part number: M801101. Check the operation of injection pump.

Front axle oil change. Front axle oil - Low Viscosity Hy-Gard. Front Axle Capacity - 4.5 L (1.19 gal).

Engine air filter elements checking. Replace as required. Engine primary air filter part number: M131802. Engine secondary air filter part number: M131803.

Yearly Maintenance

John Deere 4310 replacement parts

Engine Primary Air Filter. Part Number: M131802
Engine Secondary Air Filter. Part Number: M131803
Engine Oil Filter. Part Number: M806419
Engine Fuel Filter. Part Number: M801101
Transmission/Hydraulic Oil Filter (Hydrostatic). Part Number: LVA10419 and LVA11522
Transmission/Hydraulic Oil Filter. Part Number (SyncShift or PowrReverser): AM102723 and LVA11522
Alternator Belt. Part Number: LVU11659

Replace filter and engine oil. Service lubricating system components.

Install a new air filter elements.

Change transmission/hydraulic filter and oil.

Change suction side filter.

Drain water from fuel tank and change fuel filters.

Clean oil cooler fins and radiator.

Drain, flush and refill engine cooling system. Cooling System Capacity - 5.7 L (1.51 gal).

Check all clamps hoses and hoses.

Check battery charge.

Check and adjust valve clearance.

Inspect and adjust diesel fuel pump.