________________________________________________________________________________

John Deere 5225 Maintenance Information

John Deere 5225 Maintenance Intervals

Every Ten Hours or Daily Checks

Motor oil level checking. If the oil level is too low, add new oil.

Transmission/hydraulic fluid level checking procedure. If transmission/hydraulic oil is too low, add recommended volume.

Checking engine air filters. Replace if necessary.

Check the coolant level. If the coolant level is too low, add coolant in cooling system.

Check engine idle speed, steering unit, service brakes and hand brake. Repair any damage if required.

Oil Change And Filter Replacement

Every 300 hours

Engine oil change. Recommended oil type - Plus-50, SAE 15W-40, 10W-40, 5W-30, 10W-30. API Service Category CH-4, CG-4, CF-4. Engine oil capacity: 10 L (2.6 gal). Check motor oil level after changing.

Change engine oil filter. Engine oil filter part number: RE519626. When installing a new filter, flush the filter housing from dirt. When the filter is replaced, check the oil level. Add oil if it is low.

Change engine fuel filter. Fuel filter part number - RE508202. Check the efficiency of fuel injection pump.

Check in-line fuel filter. Replace as required. Part number - RE220719.

Check cab recirculation air filter. Clean if necessary. Cab air filter part number - RE195491.

Inspect cab fresh air filter. Service as required. Part number - RE198488.

Engine primary air filter checking. Clean as required. Engine primary air filter part number: KV16429.

Every 600 hours

Changing transmission/hydraulic fluid filter. Transmission/hydraulic filter part number: RE197065. Check the transmission/hydraulic oil level after installing a new filter. Add fluid if necessary.

Change front axle lubricant. Front Axle Oil Capacity: 4.5 L (1.18 gal). Front axle oil - GL-5.

Every 1200 hours

Change transmission fluid. Recommended fluid type: Hy-Gard, JDM J20C or J20D. How much to add: Transmission and Hydraulic System Capacity for Models with SyncShuttle Transmission - 39 L (10.3 gal), for Models with Power Reverser Transmission (12F/12R) - 43.5 L (11.5 gal), for Models with Power Reverser Transmission (24F/24R) - 45.4 L (12 gal). Add transmission fluid to the upper mark on the dipstick.

Every 1800 hours

Replace engine primary air filter. Air filter part number - KV16429.

Replace engine secondary air filter. Part number - AT171854.

Yearly Maintenance

John Deere 5225 replacement parts

Engine Primary Air Filter. Part Number: KV16429
Engine Secondary Air Filter Element. Part Number: AT171854
Engine Oil Filter. Part Number: RE519626
Engine Fuel Filter. Part Number: RE508202
Engine Inline Fuel Filter. Part Number: RE220719
Transmission/Hydraulic Oil Filter. Part Number: RE197065
Cab Fresh Air Filter. Part Number: RE198488
Cab Recirculation Air Filter. Part Number: RE195491

Change engine oil and filter. Service oil system components.

Change engine primary/secondary air cleaners.

Install a new transmission/hydraulic filter.

Change transmission/hydraulic oil.

Drain water from fuel tank, then change the fuel filter.

Change cab fresh air filter.

Replace cab recirculation air filter.

Clean oil cooler fins and radiator.

Drain, flush and refill cooling system. Cooling System Capacity: 9.5 L (10 qt).

Inspect all clamps hoses and hoses.

Check and service the battery.

Adjust engine valve clearance.

Check and adjust injection pump.