________________________________________________________________________________

John Deere 6210L Maintenance and Servicing

John Deere 6210L Service Intervals

Every 10 Hours or Daily Inspection

Check engine oil level. If after checking the oil level is low, add it.

Transmission/hydraulic fluid level checking procedure. If transmission/hydraulic oil is too low, add recommended volume.

Check engine primary and secondary air filter elements. Install a new filters if required.

Check the coolant level. If the coolant level is low, top it up.

Check engine idling, steering, hand brake and service brakes. If damages are found, repair it.

Oil And Filter Change

Every 250 hours

Replace engine oil. Recommended oil type - Plus-50, SAE 15W-40, 10W-30, 5W-30. API Service Category CJ-4, CI-4, CH-4. How much to fill: Engine Oil Capacity - 12 L (3.2 gal). After installing a new filter, check that the engine oil level is correct.

Replace engine oil filter. Engine oil filter part number: RE59754. When changing the filter, clean the dirt inside the filter housing. Check the oil level after installing a new filter. If necessary, add oil.

Every 300 hours

Inspect primary engine air filter element. Replace if necessary. Air filter element part number: AL78223.

Every 500 hours

Replace diesel primary fuel filter. Engine fuel filter part number: RE509208.

Change final fuel filter. Part number - RE62419. Check the correct operation of diesel fuel pump.

Every 750 hours

Change transmission oil filter. Fluid filter part number - AL156625. After installing a new filter, check the transmission/hydraulic oil. Add transmission fluid if it is low.

Replace filter element in hydraulic line. Hydraulic filter part number: AL156625/RE34958. After installing a new filter, check the transmission/hydraulic fluid level. If necessary, add it.

Every 1500 hours

Transmission/hydraulic oil change. Fluid type - Hy-Gard, JDM J20C, JDM J20D. Transmission/hydraulic system capacity: Tractors with SyncroPlus Transmission - 52 L (13.7 gal), Tractors with PowrReverser Transmission - 52 L (13.7 gal), Tractors with PowrQuad Transmission - 49 L (12.9 gal), Tractors with PowrQuad with Creeper - 50 L (13.2 gal). After completing the filling procedure, check transmission/hydraulic fluid level.

Change engine primary air filter elements. Air filter part number - AL78223.

Change engine secondary air filter element. Part number - AL78224.

Front axle oil change. Front axle oil: Hy-Gard. Front Axle Capacity: Without TLSTM - 5 L (1.3 gal), With TLSTM - 6 L (1.6 gal).

Yearly Maintenance

John Deere 6210L replacement parts

Engine Primary Air Filter. Part Number: AL78223
Engine Secondary Air Filter Element. Part Number: AL78224
Engine Oil Filter. Part Number: RE59754
Engine Primary Fuel Filter. Part Number: RE509208
Engine Final Fuel Filter. Part Number: RE62419
Transmission Oil Filter. Part Number: AL156625
Hydraulic Oil Filter. Part Number: AL156625/RE34958

Change filter and engine oil. Check and clean the oil system.

Install a new engine air filter elements.

Replace transmission filter.

Replace hydraulic filter.

Change transmission/hydraulic fluid.

Drain water from fuel tank and replace fuel filters.

Clean oil cooler fins and radiator.

Drain, flush and refill engine cooling system. Cooling System Capacity: 11 L (2.9 gal).

Check all hoses and clamps.

Check battery electrolyte level.

Check and adjust valve clearance.

Check and adjust fuel injectors.