________________________________________________________________________________

Kubota L5060 Maintenance Information

Kubota L5060 Service Intervals

Every Ten Hours or Daily Checks

Check motor oil level. If the engine oil level is low, fill in fresh oil.

Check the hydraulic/transmission oil level. If hydraulic/transmission oil is too low, add recommended volume.

Check engine air filters. Change if necessary.

Check coolant level in radiator. If the coolant level is too low, add coolant in cooling system.

Check engine idling, steering unit, service brakes and hand brake. If malfunctions are found, repair it.

Oil Change And Filter Replacement

Every 100 Hours

Clean engine primary air filter element. Change if necessary.

Service engine secondary air filter element. Replace as required.

Lubricate the front axle bearing assembly. Oil Type: SAE 80W-90.

Every 400 Hours

Change engine oil. Recommended oil type - SAE 20, SAE30 or SAE 10W-30, 15W-40. API Service Classification CC, CD, CF or CJ. Engine oil capacity (Kubota V2403-CRT): 10 qts (9.4 L). After adding engine oil, check the level with a dipstick.

Changing engine oil filter. Filter part number - HH164-32430. When change the filter, cleaning the housing is recommended. After replacing the filter, check the oil level. If necessary, add it.

Changing hydraulic/transmission oil. Oil type - Kubota Super UDT. Hydraulic/transmission system capacity: 12 gal (45.0 L). When the procedure is complete, check the hydraulic/transmission oil level.

Changing hydraulic oil filter. Part number of hydraulic filter: HHTA0-37710. Check the hydraulic/transmission fluid level after installing a new filter. Add hydraulic/transmission oil if it is low.

Change engine air filters. Engine primary air filter part number: TD270-93232. Engine secondary air filter part number: TA040-93220.

Replace engine fuel filter. Fuel filter part number - 1J800-43172. Check the efficiency of fuel injection pump.

Front axle lubricant change. Front axle case capacity: 9.5 qts (9.0 L). Front Axle Oil: SAE 80W-90.

Annual Maintenance

Kubota L5060 replacement parts

Engine Primary Air Filter. Part Number: TD270-93232
Engine Secondary Air Filter. Part Number: TA040-93220
Engine Oil Filter. Part Number: HH164-32430
Engine Fuel Filter Element. Part Number: 1J800-43172
Drive Belt. Part Number: 15469-97010
Hydraulic Oil Filter. Part Number: HHTA0-37710

Change engine oil and filter. Check and clean the lubrication system.

Replace engine primary and secondary air filter elements.

Change transmission/hydraulic oil.

Install a new hydraulic filter and fill with fresh oil.

Drain water from fuel tank, then change the fuel filter.

Clean radiator and oil cooler fins.

Flush the cooling system and refill with fresh coolant. Cooling system capacity: 8.7 qts (8.2 L).

Inspect all clamps hoses and hoses.

Check battery charge.

Adjust engine valve clearance.

Check and adjust injector pump.