________________________________________________________________________________

Massey Ferguson 3080 Tractor Technical Information

MF 3080 Engine Specifications

Engine Model - Perkins A6.354
Number of cylinders - 6
Aspiration - Natural
Bore, mm - 98,47
Stroke, mm - 127,0
Cubic capacity, cm3 - 5800
Maximum engine power, kW - 73,5
Maximum torque, Nm - 374
Engine speed at maximum torque, rpm - 1200
Idling speed, rpm - 850
Maximum rated speed, rpm - 2200
Torque at rated speed, Nm - 325
Maximum no load speed, rpm - 2310
Lubrication - Gear pump
Valves clearances, Intake/exhaust, mm - 0,20/0,45
Lift pump - AC DELCO
Fuel filter with sediment bowl - СAV
Number of elements - Two
Fuel injection pump - rotary with mechanical governor
Injection timing, degrees - 23
Cold weather starting - Thermostart or ether, according to market
Air cleaner - Two-stage, dry element, with centrifugal prefilter and blockage indicator
Electrical system voltage - 12 volt, negative earth
Batteries - Two
Cooling system - Pressurized system with centrifugal pump
Centrifugal water pump - belt driven
Fan - belt driven
Belt deflection, mm - 10,0
Fuel tank, liters - 173,0
Cooling system, liters - 25,0
Engine oil, liters - 16,5

Massey Ferguson 3080 Transmission

Basic Transmission - 32 Forward and 32 Reverse
Transmission Type - Speedshift
Forward / Reverse Speeds - 32F / 32R
Optional Transmission - 32 Forward and 32 Reverse
Transmission Type - Dynashift
Reverse Shuttle - Standard, mechanical
Creeper Gearbox - Opt.
Forward / Reverse Speeds With Creeper - 48F / 48R
Clutch - Dry single disc
Clutch Type - Diaphragm push-type
Disc Diameter - 330 mm (13,0 in)
Clutch adjustment - Automatic
Reduction unit - Epicyclic, in the rear axle housings
Reduction ratios - 5,077 to 1

MF 3080 Power Take Off

Rear PTO Type - Independent, proportional to the engine speed
Rear PTO Power, kW - 68
Rear PTO Ratio (540 rpm at 1980 engine rpm) - 3,668:1
PTO Ratio (1000 rpm at 2000 engine rpm) - 2:1
Rear Speed Changing - Either by changing shafts, or by lever selection
Rear PTO Shaft - 540/1000 rpm - 35 mm (1.38 in) diameter, 6/21 splines
Rear PTO Control - Lever in the cab
Front PTO - Optional
Front PTO Power, kW - 69
Front PTO Control - Hydraulic, electrically actuated by push button in the cab
Front PTO Ratio (1000 rpm at 2040 engine rpm) - 2.04:1
Ground speed PTO - Optional
Ground Speed PTO Control - From the normal PTO operating lever

Massey Ferguson 3080 Hydraulics

Hydraulic System - Two stage gear pump, driven directly by the engine
Hydraulic Pump Flow, gal/min (l/min) - 13.2 (50.0)
Maximum Hydraulic Pressure - 185.0 bar
Steering Pump Flow, gal/min - 7.6 (29.0)
Maximum Steering Pressure - 17.0 bar
Suction circuit filtration - One external 150 micron throwaway, canister type filter
Low flow circuit filtration - One external 15 micron high pressure filter

3-Point Hitch

Hitch type - 3-point, with fixed, telescopic or quick attach hook ball ends
Hitch Category - 2
Rams - Twin externally mounted
Ram diameter - 66 mm (2.60 in)
Position of lift rod on lower links, mm - 550/650
Length of lift rods, mm - 595-827
Lower links horizontal/full raised at 550 mm, kg (lb) - 4350-4276 (9600-9437) / 5194-4308 (11463-9507)
Lower links horizontal/full raised at 650 mm, kg (lb) - 5740-4788 (12668-10567) / 5689-4703 (12555-10379)

MF 3080 Front Axle and Steering

FWD Clutch Mechanism - Hydraulic, electrically actuated by push button in the cab
Differential Lock - Front and rear differential lock-hydraulic with electrical control
Front Axle assembly, liters - 6,5
Front Final Reduction Units (each), liters - 1,8
Steering - Hydrostatic
Steering Column Type - Fixed or tiltabte telescopic
Steering ram diameter (2WD/4WD), mm - 68/63
Steering rod diameter (2WD/4WD), mm - 45/32
Total stroke (2WD), mm - 236
Ram stroke (4WD), mm - 2x119
Volumetric Displacement (2WD/4WD), cc - 482/550
Steering pressure at steering valve, bar - 166
Steering pressure at return port, bar - 16
Steering valve/displacement - Danfoss/125 cc

Rear Axle and Brakes

Differential Lock - Positive clutch
Differential Lock Control - Hydraulic, with electrical control
Rear Axle Capacity, l - 60,0
Main Brake Type - Oil-immersed single disc per wheel
Brake Disc Outer Diameter, cm - 35,5
Brake Disc Inner Diameter, cm - 29,0
Operation - Hydraulic, from two master cylinders, automatic adjustment
Handbrake - Operates on the rear axle bevel drive pinion

Massey Ferguson 3080 Dimensions and Weights

Standard ront Tires - 12.4-28 / 15.5-38
Standard Rear Tires - 13.6-28 / 16.9-38
Wheelbase (2WD), mm (in) - 2696 (106.1)
Wheelbase (4WD), mm (in) - 2699 (106.25)
Overall length with drawbar (2WD), mm (in) - 4320 (170.0)
Overall length with drawbar (4WD), mm (in) - 4472 (176.0)
Height (cab tractor), mm (in) 2724 - (107.2)
Overall width, mm (in) - 2570 (101.2)
Ground clearance (under drawbar frame), mm (in) - 385 (15.2)
Height to steering wheel (platform models), mm (in) - 2068 (81.4)
Steering angle (2WD), Inner/Outer, deg - 56/43
Steering angle (4WD), Inner/Outer, deg - 50/38.5
Turning Radius (2WD), without brake/with brake, mm (in) - 4320/3800 (171.4/159.3)
Turning Radius (4WD), without brake/with brake, mm (in) - 4700/4300 (186.5/171.2)
Operating Weight (2WD), kg (lb) - 4185 (9226)
Operating Weight (4WD), kg (lb) - 4420 (9744)

Massey Ferguson 3080 Attachments

MF 856 Loader Specifications

Loader model - MF 856
Height (to pin) - 151 in (3830 mm)
Clearance, dumped bucket - 120 in (3040 mm)
Dump reach - 40 in (1010 mm)
Dump angle - 43
Reach at ground - 97 in (2460 mm)
Rollback at ground - 21
Breakout force (at pin) - 5300 lb (2404 kg)
Lift to full height (at pin) - 4100 lb (1859 kg)
Bucket width - 96 in (2430 mm)
Raise time to height - 8,5 sec.
Bucket dump time - 7,5 sec.
Lowering time - 6,5 sec.
Rollback time - 5 sec.

MF TRACTORS TROUBLESHOOTING
1652	1749	2620	2725	2805
3050	3120	3640	3709	4245
4455	5320	5455	5613	6150
6280	6480	6615	7618	7720