________________________________________________________________________________

Massey Ferguson 220 Maintenance and Servicing

Massey Ferguson 220 Maintenance Intervals

Every Ten Hours or Daily

Check motor oil level. If the engine oil level is low, fill in fresh oil.

Transmission/hydraulic fluid level checking procedure. When the transmission/hydraulic fluid is low, add fresh oil.

Check engine air filter elements. Replace with a new one if necessary.

Check the coolant level. If the coolant level is low, add it.

Check engine idling, steering, parking brake and service brakes. Repair any damage if required.

Every 50 Hours

Checking the air pressure of tyres. Inflate if required.

Check the battery. Clean if required.

Checking the oil in front axle. Add oil if necessary.

Tighten wheel nuts and bolts.

Every 100 hours

Engine oil change. Recommended oil type - SAE 20, 20W, API service classification SB, SE, CF, CC. Oil system capacity: 5.0 qt (4.7 L). Check motor oil level after changing.

Oil filter changing. Filter part number - 72118856. When replace the filter, flushing the housing is necessary. When the filter is replaced, check the oil level. If after checking the oil level is low, add it.

Check or replacing engine primary air filter elements. Change if necessary. Air filter part number - 1031436M91.

Inspect engine secondary air filter element. Replace as required. Part number - 773101M2.

Check the hydraulic fluid level in system. Fill as required.

Lubricate the rear and front wheel bearings.

Every 200 hours

Clean radiator fins if fins are dirty.

Check fan/alternator belt tension. Adjust as required.

Check wheel bolt torque.

Every 400 Hours

Replace fuel filter. Fuel filter part number - 72098616 (Spin-on). Check diesel fuel pump adjustment.

Check radiator coolant. If coolant is low, top up.

Check and tighten all hoses and clamps.

Every 500 Hours

Change hydraulic/transmission fluid. Recommended oil type - Permatran 821XL, SAE 10W-30. Transmission/Hydraulic Fluid Capacity - 5.5 gal (21.0 L). Add hydraulic/transmission oil to the upper mark on the dipstick.

Check engine idle speeds. Adjust if necessary.

Change front axle lubricant. Front Axle Capacity - 0.45 gal (1.7 L). Front Axle Oil - Permatran.

Check brake adjustment.

Annually

Massey Ferguson 220 replacement part

Engine Primary Air Filter. Part Number: 1031436M91
Engine Secondary Air Filter Element. Part Number: 773101M2
Engine Oil Filter. Part Number: 72118856
Engine Fuel Filter Element. Part Number: 72098616 (Spin-on)

Replace filter and engine oil. Service lubrication system components.

Change engine primary and secondary air cleaner elements.

Change transmission/hydraulic oil.

Change the fuel filter by first drain water from fuel tank.

Clean oil cooler fins and radiator.

Flush the cooling system and refill with new coolant. Cooling System Capacity - 5.3 qt (5.0 L).

Inspect all clamps hoses and hoses.

Check battery electrolyte level.

Check and adjust valve clearance.

Inspect and adjust fuel injection nozzle.

MF TRACTORS TROUBLESHOOTING
1652	1749	2620	2725	2805
3050	3120	3640	3709	4245
4455	5320	5455	5613	6150
6280	6480	6615	7618	7720