________________________________________________________________________________

Massey Ferguson 250 Maintenance Information

Massey Ferguson 250 Maintenance Intervals

Every Ten Hours or Daily

Engine oil level checking procedure. If after checking the engine oil level is low, top it up.

Transmission/hydraulic fluid level checking. If the transmission/hydraulic fluid is too low, fill the required volume.

Check engine air filters. Change if required.

Check engine coolant level. If the coolant level is low, top it up.

Check engine idle speed, steering, service brakes and parking brake. Repair any damage if necessary.

Every 50 Hours

Checking the air pressure of tyres. Inflate if required.

Test battery charging. If the charge level is low, charge the battery.

Check front axle oil level. Add if required.

Check hydraulic fluid level. Fill the hydraulic system as required.

Lubricate the front axle wheel bearings.

Inspect the rear and front wheels. Tighten nuts and bolts as required.

Every 200 hours

Replace engine oil. Recommended motor oil: SAE 10W-30, 15W-40, 20W-40. API service classification SE, SF, CC, CD. How much to fill: Engine Oil Capacity - 7.2 qt (6.8 L). Add oil to the upper mark on the dipstick.

Replacing engine oil filter. Engine oil filter part number: 1447082M2. Before replacing, remove dirt from the filter housing. After replacing the filter, check the oil level. Add oil if required.

Engine air filter elements checking. Replace as required. Engine primary air filter part number: 3824032V1. Engine secondary air filter part number: 3824033V1.

Clean radiator surface from dirt.

Check fan/alternator belt tension. Adjust as required.

Check the torque of the wheel bolts.

Every 500 Hours

Change hydraulic/transmission fluid. Recommended fluid type: Permatran 3. How much is needed: Transmission/Hydraulic Oil Capacity - 11 gal (41.6 L). After filling, check the hydraulic/transmission fluid level with a dipstick.

Replace steering fluid filter. Steering filter part number - 1052097V1. When the filter is replaced, check the steering oil level. If necessary, add it. Steering Oil Capacity - 1.0 qt (0.9 L).

Perform hydraulic filter replacement. Part number of hydraulic filter element - 1687042V91 (Lift Pump), 1810694V92 (Differential Housing). When installation is complete, check the hydraulic/transmission fluid level. Add hydraulic oil if it is low.

Change engine fuel filter. Engine fuel filter part number: 836218V92. Check the efficiency of injection pump.

Check cooling system for leaks. Add coolant if necessary.

Check engine idle. If necessary, adjust the idle speed on the engine.

Inspect all hoses and fittings. Tighten as required.

Change front axle lubricant.

Check and adjust the parking and service brakes.

Annually

Massey Ferguson 250 replacement parts

Engine Primary Air Filter. Part Number: 3824032V1
Engine Secondary Air Filter Element. Part Number: 3824033V1
Engine Oil Filter. Part Number: 1447082M2
Engine Fuel Filter Element. Part Number: 836218V92
Hydraulic Filter. Part Number: 1687042V91 (Lift Pump), 1810694V92 (Differential Housing)
Steering Filter Element. Part Number: 1052097V1

Change engine oil and filter. Service lubricating system components.

Replace engine air filter elements.

Change transmission/hydraulic fluid.

Replace hydraulic filter and oil.

Replace steering filter and steering oil.

Drain water from fuel tank and change fuel filters.

Clean radiator and oil cooler fins.

Drain, flush and refill engine cooling system. Cooling System Capacity - 10.5 qt (9.9 L).

Check all clamps hoses and hoses.

Check level of battery electrolyte.

Check and adjust valve clearance.

Check and adjust fuel injectors.

MF TRACTORS TROUBLESHOOTING
1652	1749	2620	2725	2805
3050	3120	3640	3709	4245
4455	5320	5455	5613	6150
6280	6480	6615	7618	7720