________________________________________________________________________________

Massey Ferguson 263 Maintenance Data

Massey Ferguson 263 Service Intervals

Every Ten Hours or Daily

Engine oil level checking procedure. If after checking the engine oil level is low, top it up.

Check the hydraulic/transmission fluid level. When hydraulic/transmission oil is low, fill in new oil.

Check engine air filters. Install a new filters if required.

Check engine coolant level. If the coolant level is low, top it up.

Check engine idle speed, steering, service brakes and parking brake. If damages are found, repair it.

Every 50 Hours

Check tire air pressure. Inflate tires if required.

Inspect the battery. Clean the terminals as required.

Check front axle oil level. Top up as necessary.

Check fluid in hydraulic system. Fill as required.

Lubricate the rear and front wheel bearings.

Check wheels and tighten screws and nuts if required.

Every 250 hours

Changing engine oil. Recommended engine oil: SAE 10W-30, 15W-30, 15W-40, 20W-40. API service classification SE, SF, CC, CD. How much is needed: Engine Oil Capacity: 7.2 qt (6.8 L). After installing a new filter, check that the engine oil level is correct.

Replace oil filter. Engine oil filter part number: 4223058M1. When installing a new filter, flush the filter housing from dirt. When the filter is replaced, check the oil level. Add oil if it is low.

Engine air filter elements checking. Replace as required. Engine primary air filter part number: 3595518V1. Engine secondary air filter part number: 3595519V2.

Remove dirt from radiator fins with a brush.

Inspect the alternator/fan belt and adjust the belt tension if necessary.

Check wheel bolt torque.

Every 500 Hours

Replace steering oil filter. Part number: 3904213M91. After installing a new filter, check the steering fluid level. If after checking the steering oil level is low, add it. Steering Oil Capacity - 0.74 qt (0.70 L).

Change fuel filter. Fuel filter element part number: 836218V92. Check diesel fuel pump operation.

Check cooling system for leaks. If coolant is low, top up.

Change front axle lubricant. Front Axle Capacity - 1 gal (3.7 L). Front Axle Oil - Permatran.

Adjust service and parking brakes.

Every 1000 Hours

Replace transmission/hydraulic oil. Recommended oil type - Permatran 3, SAE 15W-30. How much to change: Transmission/Hydraulic Oil Capacity - 8.2 gal (31 L). After adding transmission/hydraulic oil, check the level with a dipstick.

Replace hydraulic oil filter. Hydraulic oil filter part number: 1810694V92 or 1687042V91. After installing a new filter, check the transmission/hydraulic fluid level. If after checking the oil level is low, add it.

Check engine idling. If necessary, adjust the engine idle speed.

Inspect all fittings and hoses. Tighten if necessary.

Annual Maintenance

Massey Ferguson 263 replacement parts

Engine Primary Air Filter. Part Number: 3595518V1
Engine Secondary Air Filter Element. Part Number: 3595519V2
Engine Oil Filter. Part Number: 4223058M1
Engine Fuel Filter Element. Part Number: 836218V92
Hydraulic Filter. Part Number: 1810694V92 or 1687042V91
Steering Filter Element. Part Number: 3904213M91

Change filter and engine oil. Check and clean the lubrication system.

Change engine air filter elements.

Replace steering filter and oil.

Change hydraulic/transmission oil.

Change hydraulic filter.

Drain water from fuel tank and replace fuel filter.

Clean radiator and oil cooler fins.

Flush the cooling system and add fresh coolant. Cooling System Capacity - 2.8 gal (10.7 L).

Inspect all hoses and clamps.

Check battery charging.

Check engine valve clearance.

Check and adjust fuel injectors.

MF TRACTORS TROUBLESHOOTING
1652	1749	2620	2725	2805
3050	3120	3640	3709	4245
4455	5320	5455	5613	6150
6280	6480	6615	7618	7720