________________________________________________________________________________

Massey Ferguson Super 90 Maintenance Information

Massey Ferguson Super 90 Maintenance Intervals

Every 10 Hours or Daily

Motor oil level checking. If the engine oil level is low, add fresh oil.

Check transmission oil level. When transmission oil is low, add recommended volume.

Check engine air filter element. Change if necessary.

Check radiator coolant level. If the coolant level is low, add it.

Check engine speed, steering system, service brakes and parking brake. If malfunctions are found, repair it.

Every 50 Hours

Check tire air pressure. Inflate tires if required.

Check battery condition. Charge or replace.

Checking the oil in front axle. Fill as required.

Check the oil level in hydraulic system. Fill the hydraulic system as required.

Lubricate front and rear axle hub bearings.

Tighten wheel nuts and bolts.

Every 200 hours

Engine oil change. Engine oil type - 10W-30, 15W-40, 20W-40. Engine Oil Capacity: Diesel - 11.5 qt (10.8 L) / Gas and LP - 8.0 qt (7.6 L). Check engine oil level after replacement.

Oil filter element changing. Oil filter element part number: 1883288V91 (Diesel) and 835817V91 (Gas and LP). When changing the filter, clean the dirt inside the filter housing. Check the oil level after installing a new filter. If necessary, add oil.

Clean radiator grill from dirt.

Inspect fan/alternator belt. Change if necessary.

Check the tightening torque of the front and rear hub bolts.

Every 500 Hours

Change diesel fuel filter. Fuel filter part number - 836218V92. Service sediment bowl for gas engines. Part number - 193995V92

Check radiator coolant. Top up if coolant is low.

Check engine low idle speed. Adjust engine idle as required.

Check the fittings and hoses. Tighten if necessary.

Front axle lubricant change.

Check brake adjustment.

Every 750 Hours

Engine air filter elements replacement (Gas engine). Air filter part number: 185857M91.

Replace transmission/hydraulic fluid. Recommended oil - Permatran 821XL, SAE 10W-30. Transmission/hydraulic oil capacity: 11.5 gal (43.5 L). After adding transmission fluid, check the level with a dipstick.

Replace filter in hydraulic system. Part number of hydraulic filter: 521451M1 (Element). After installing a new filter, check the hydraulic fluid level. Add oil if required.

Replace the steering filter element. Part number - 1911855V4 or 185541M2.

Yearly Maintenance

Massey Ferguson Super 90 replacement parts

Engine Oil Filter Element. Part Number: 1883288V91 (Diesel) and 835817V91 (Gas)
Engine Fuel Filter (Diesel). Part Number: 836218V92
Engine Sediment Bowl (Gas). Part Number: 193995V92
Engine Air Filter (Gas). Part Number: 185857M91
Hydraulic Filter. Part Number: 521451M1 (Element)
Steering Filter Element. Part Number: 1911855V4 or 185541M2

Change engine oil and filter. Service lubricating system components.

Replace air filter element.

Fill in fresh hydraulic/transmission fluid.

Install a new hydraulic and steering filters.

Change the fuel filter by first drain water from fuel tank.

Clean radiator and oil cooler fins.

Flush the cooling system and refill with fresh coolant. Cooling System Capacity - 15 qt (14.2 L)

Check all hoses and clamps.

Check and service the battery.

Adjust engine valve clearance.

Check and adjust injection pump/carburetor.

MF TRACTORS TROUBLESHOOTING
1652	1749	2620	2725	2805
3050	3120	3640	3709	4245
4455	5320	5455	5613	6150
6280	6480	6615	7618	7720