Specifications, Service, and Repair of Farm and Lawn Tractors

________________________________________________________________________________

Ford 1220 Maintenance Information

Ford 1220 Maintenance Intervals

Every Ten Hours or Daily Inspection

Check the engine oil level. If the oil level is too low, add new oil.

Transmission/hydraulic oil level checking procedure. When transmission/hydraulic oil is low, fill in new oil.

Checking air filter element. Replace if necessary.

Check radiator coolant level. If the coolant level is low, top it up.

Check idle engine speed, steering unit, parking brake and service brakes. Repair any damage if required.

Oil And Filter Change

Every 100 Hours

Engine oil change. Recommended motor oil: SAE 15W-40, 10W-30, SAE 10W. Oil system capacity: 3.5 qt (3.3 L). After filling, check the engine oil level with a dipstick.

Inspect engine air filter element. Replace as required. Air filter part number - 86512886.

Perform inspection and cleaning of the engine fuel filter.

Lubricate the front axle bearing assembly.

Every 200 Hours

Engine oil filter changing. Filter part number - 86546623 / SBA140516180. Before replacing, remove dirt from the filter housing. After replacing the filter, check the oil level. If necessary, add it.

Change diesel fuel filter. Engine fuel filter part number: 87300039 / SBA360720020. Check the efficiency of injection pump.

Every 300 Hours

Change transmission/hydraulic fluid. Recommended transmission/hydraulic oil: 134D, ATF Dexron II-D, SAE 10W-30. How much to change: Oil Capacity - 4.2 gal (16 L). Check transmission/hydraulic oil level after replacement.

Change hydraulic oil filter. Hydraulic fluid filter part number: 9846407, SBA340500990, SBA340500370 (HST). After installing a new filter, check the transmission/hydraulic fluid level. Add transmission/hydraulic fluid if it is low.

Front axle fluid change. Front Axle Oil Type - 134D, Gearlube 80W-90. Front Axle Oil Capacity - 2 qt (1.9 L). Steering Oil Type - 134D, Gearlube LS 80W-90. Steering Oil Capacity - 1.9 qt (1.8 L).

Yearly Maintenance

Ford 1220 replacement parts

Engine Air Filter. Part Number: 86512886
Engine Oil Filter. Part Number: 86546623 / SBA140516180
Engine Fuel Filter. Part Number: 87300039 / SBA360720020
Hydraulic Filter. Part Number: 9846407, SBA340500990, SBA340500370 (HST)

Change filter and engine oil. Check and clean the lubrication system.

Replace air cleaner element.

Change hydraulic/transmission fluid.

Replace hydraulic filter.

Change the fuel filter by first drain water from fuel tank.

Clean oil cooler fins and radiator.

Flush the cooling system and refill with fresh coolant. Cooling System Capacity - 3.7 qt (3.5 L).

Check all clamps hoses and hoses.

Check and service the battery.

Check and adjust valve clearance.

Check and adjust fuel injectors.

________________________________________________________________________________

________________________________________________________________________________________

FORD TRACTORS SPECIFICATIONS

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

FORD TRACTORS MAINTENANCE

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________