________________________________________________________________________________

Ford 3600 Maintenance and Servicing

Ford 3600 Service Intervals

Every Ten Hours or Daily Inspection

Check the engine oil level. If after checking the oil level is low, add it.

Transmission/hydraulic oil level checking procedure. When the transmission/hydraulic fluid is low, fill the required volume.

Engine air filters checking. Change if necessary.

Check the coolant level in cooling system. If the coolant level is low, add it.

Check idle engine speed, steering unit, service brakes and parking brake. If you found a problem, fix it.

Oil And Filter Change

Every 300 Hours

Change engine oil. Recommended engine oil: SAE 15W-40, 10W-30, SAE 10W. How much is needed: Engine Oil Capacity - 7 qt (6.6 L). Add oil to the upper mark on the dipstick.

Replacing engine oil filter. Filter part number - 86546614 or E8NN6714AA. When change the filter, cleaning the housing is required. After installation, checking the oil level is recommended. Add oil if required.

Engine air filter element checking (primary and secondary). Service as required.

Check and service cab air filter element.

Inspect and clean engine fuel filter.

Lubricate front and rear axle hub bearings.

Every 600 Hours

Engine air filter elements replacement. Air filter part number - 84493216 or 86525008, E9NN9B618AA or D6NN9601B.

Steering fluid change. Recommended steering oil: 134D, Gearlube LS 80W-90. Steering oil capacity: 2 qt (1.9 L). After completing the filling procedure, check steering fluid level.

Replacing power steering fluid filter. Steering filter part number: EDPN3K758A.

Every 1200 Hours

Transmission fluid change. Recommended transmission oil: 134D, SAE 10W-30. Transmission oil capacity: 3.5 gal (13.2 L). After completing the filling procedure, check transmission fluid level.

Hydraulic oil change. Hydraulic oil type: 134D, SAE 10W-30. Hydraulic Oil Capacity - 6.2 gal (23.5 L). Checking the hydraulic oil level. If required, add it.

Hydraulic filter replacement. Hydraulic filter element part number - 84518613 or D6NNB486A. After installation, checking the hydraulic oil level is recommended. If required, add it.

Change diesel fuel filter. Fuel filter part number - 84535312 or EDPN9N074AA. Check the efficiency of fuel injection pump.

Replace cab air filter. Cab air filter part number - D8NN94000N20CA.

Annual Maintenance

Ford 3600 replacement parts

Engine Air Filter. Part Number (Primary/Secondary): 84493216 or 86525008, E9NN9B618AA or D6NN9601B
Engine Oil Filter. Part Number: 86546614 or E8NN6714AA
Engine Fuel Filter. Part Number: 84535312 or EDPN9N074AA
Hydraulic Filter. Part Number: 84518613 or D6NNB486A
Power Steering Filter. Part Number: EDPN3K758A
Cab Air Filter. Part Number: D8NN94000N20CA

Change filter and engine oil. Service lubrication system components.

Install a new air filter elements.

Change transmission oil.

Change hydraulic fluid and replace hydraulic filter.

Change steering oil and replace power steering filter.

Install a new cab air filter.

Drain water from fuel tank and replace fuel filter.

Clean oil cooler fins and radiator.

Flush the cooling system and refill with new coolant. Cooling System Capacity - 12 qt (11.3 L).

Check all clamps and hoses.

Check and service the battery.

Check engine valve clearance.

Check and adjust injector pump.