________________________________________________________________________________

Ford 3000 Maintenance Data

Ford 3000 Periodic Maintenance

Every 10 Hours or Daily Checking

Engine oil level checking procedure. If the oil level is too low, add new oil.

Check the transmission/hydraulic oil level. When transmission/hydraulic oil is low, add recommended volume.

Check air filter. Replace if required.

Check the coolant level. If the coolant level is too low, add coolant in cooling system.

Check engine speed, steering system, parking brake and service brakes. If damages are found, repair it.

Oil Change And Filter Replacement

Every 300 Hours

Changing engine oil. Engine oil type - SAE 15W-40, 10W-30, SAE 10W. How much to pour: Engine Oil Capacity - 8 qt (7.6 L). When the procedure is complete, check the engine oil level.

Replacing engine oil filter. Engine oil filter part number: 86546611 or CFPN6731B (Cartridge) / 86546614 or E8NN6714AA (Spin-On). Flush the filter housing before the filter element replacement procedure. Check the oil level after installing a new filter. Add oil if required.

Inspect engine air filter element. Service as required.

Check the engine fuel filter and clean if required.

Lubricate rear and front axle hub bearings.

Every 600 Hours

Change air filter element. Engine air filter part number: E6NNR500DA or E6NN9B618AA.

Change steering oil. Recommended oil type: 134D, Gearlube LS 80W-90. Steering oil capacity: 2 qt (1.9 L). After completing the filling procedure, check steering oil level.

Replacing power steering oil filter. Steering filter part number - C7NN3N538A or EDPN3K758A. Check the steering fluid level after installing a new filter. Add steering fluid if it is low.

Every 1200 Hours

Change transmission fluid. Recommended fluid type: 134D, SAE 10W-30. Transmission fluid capacity: 6.6 qt (6.2 L) with 4-Speed, 3.3 gal (12.5 L) with 8-Speed, 2.8 gal (10.6 L) with Select-O-Speed. After completing the filling procedure, check transmission oil level.

Change hydraulic oil. Recommended oil type: 134D, SAE 10W-30. Hydraulic oil capacity: 6.3 gal (23.8 L). After completing the filling procedure, check hydraulic oil level.

Replacing transmission fluid filter. Transmission fluid filter part number - 309735 (Select-O-Speed). Check the transmission fluid level after installing a new filter. Add transmission fluid if it is low.

Replace filter in hydraulic system. Part number of hydraulic filter: 84277192 or C5NNN832B. Check the hydraulic fluid level after installing a new filter. Add hydraulic fluid if it is low.

Replace fuel filter. Fuel filter element part number: 84535312 or EDPN9N074AA (Diesel). Check the correct operation of fuel injection pump.

Yearly Maintenance

Ford 3000 replacement parts

Engine Air Filter. Part Number: E6NNR500DA or E6NN9B618AA
Engine Oil Filter. Part Number: 86546611 or CFPN6731B (Cartridge) / 86546614 or E8NN6714AA (Spin-On)
Engine Fuel Filter. Part Number: 84535312 or EDPN9N074AA (Diesel)
Hydraulic Filter. Part Number: 84277192 or C5NNN832B
Power Steering Filter. Part Number: C7NN3N538A or EDPN3K758A
Transmission Filter. Part Number: 309735 (Select-O-Speed)

Change engine oil and filter. Service lubrication system components.

Install a new air filter element.

Change transmission/hydraulic fluid and filters.

Change steering fluid and replace power steering filter.

Drain water from fuel tank, then replace the fuel filter.

Clean radiator and oil cooler fins.

Drain, flush and refill cooling system. Cooling System Capacity - 13.8 qt (13.1 L).

Check all hoses and clamps.

Check battery electrolyte level.

Check and adjust valve clearance.

Check and adjust fuel injectors.