________________________________________________________________________________

Ford 2600 Inspection and Maintenance

Ford 2600 Maintenance Intervals

Every 10 Hours or Daily Checking

Motor oil level checking. If the engine oil level is low, add fresh oil.

Transmission/hydraulic oil level checking procedure. When transmission/hydraulic oil is low, add recommended volume.

Engine air filters checking. Change if necessary.

Check the coolant level in cooling system. If the coolant level is low, add it.

Check engine speed, steering system, hand brake and service brakes. If you found a problem, fix it.

Oil Change And Filter Replacement

Every 300 Hours

Inspect engine air filter element. Service as required.

Inspect cab air filter element. Service as required.

Check and clean the engine fuel filter.

Change engine oil. Recommended motor oil: SAE 15W-40, 10W-30, SAE 10W. How much to pour: Engine Oil Capacity - 7 qt (6.6 L). Fill with the new oil up to the upper notch on the dipstick.

Engine oil filter changing. Engine oil filter part number: 86546614 or E8NN6714AA. Flush the filter housing before the filter element replacement procedure. When installation is complete, check the oil level. Add oil if required.

Lubricate front and rear axle hub bearings.

Every 600 Hours

Replacing primary and secondary air filter elements. Air filter element part number: 84493216 or 86525008, E9NN9B618AA or D6NN9601B.

Steering oil change. Steering oil type - 134D, Gearlube LS 80W-90. How much to fill: Steering Oil Capacity - 2 qt (1.9 L). Check steering fluid level after changing.

Replace power steering filter element. Steering filter part number: EDPN3K758A.

Every 1200 Hours

Transmission oil change. Transmission oil type - 134D, SAE 10W-30. Transmission Oil Capacity - 3.5 gal (13.2 L). Check transmission oil level after changing.

Hydraulic fluid change. Hydraulic fluid type - 134D, SAE 10W-30. How much to fill: Hydraulic Oil Capacity - 6.2 gal (23.5 L). Check hydraulic fluid level after changing.

Changing cab air filter. Cab air filter part number: D8NN94000N20CA.

Replace hydraulic filter element. Hydraulic filter part number: 84518613 or D6NNB486A. Check the hydraulic fluid level after installing a new filter. Add hydraulic fluid if it is low.

Replace engine fuel filter. Fuel filter element part number: 84535312 or EDPN9N074AA. Check injection pump adjustments.

Yearly Maintenance

Ford 2600 replacement parts

Engine Air Filter (Primary/Secondary). Part Number: 84493216 or 86525008, E9NN9B618AA or D6NN9601B
Engine Oil Filter. Part Number: 86546614 or E8NN6714AA
Engine Fuel Filter. Part Number: 84535312 or EDPN9N074AA
Hydraulic Filter. Part Number: 84518613 or D6NNB486A
Power Steering Filter. Part Number: EDPN3K758A
Cab Air Filter. Part Number: D8NN94000N20CA

Replace filter and engine oil. Check and clean the oil system.

Install a new air filter elements.

Change transmission fluid.

Change steering oil.

Replace power steering filter element.

Replace hydraulic filter and fill the hydraulic system with fresh oil.

Replace the fuel filter, but drain water from fuel tank first.

Clean radiator and oil cooler fins.

Flush the cooling system and add fresh coolant. Cooling System Capacity - 12 qt (11.3 L).

Check all hoses and clamps.

Check battery electrolyte level.

Check engine valve clearance.

Check and adjust fuel injectors.