________________________________________________________________________________

Ford 1200 Maintenance and Servicing

Ford 1200 Service Intervals

Every 10 Hours or Daily Inspection

Motor oil level checking. If the oil level is too low, add new oil.

Transmission/hydraulic fluid level checking. When transmission/hydraulic oil is low, fill in new oil.

Check air filter. Change if necessary.

Check engine coolant level. If the coolant level is low, top it up.

Check engine idle speed, steering, hand brake and service brakes. If malfunctions are found, repair it.

Oil And Filter Change

Every 100 Hours

Changing engine oil. Recommended motor oil: SAE 10W-40, 15W-40, 10W-30, SAE 20W-20. How much to add: Engine Oil Capacity - 3.4 qt (3.2 L). After adding engine oil, check the level with a dipstick.

Check engine air filter element. Change as required. Part number - 86512887.

Ins fuel filter. Replace as required. Engine fuel filter part number: SBA130366040.

Lubricate the front axle bearing assembly.

Every 200 Hours

Replacing engine oil filter. Oil filter part number: 84476642 / E1NN6714AB. Before replacement procedure, clean the filter housing from dirt. After installation, checking the oil level is recommended. Add oil if necessary.

Replace fuel filter. Engine fuel filter part number: SBA130366040. Check the efficiency of injection pump.

Every 300 Hours

Change transmission/hydraulic fluid. Recommended oil - 134D, SAE 10W-30. How much to change: Transmission/Hydraulic Oil Capacity - 5 gal (18.9 L). Check transmission/hydraulic oil level after changing.

Replacing hydraulic oil filter. After installation, checking the transmission/hydraulic fluid level is recommended. If after checking the oil level is low, add it.

Front axle oil change. Front Axle Oil Type - 134D, Gearlube 80W-90. Front Axle Capacity - 1.8 qt (1.6 L).

Annual Maintenance

Ford 1200 replacement parts

Engine Air Filter. Part Number: 86512887
Engine Oil Filter. Part Number: 84476642 / E1NN6714AB
Engine Fuel Filter. Part Number: SBA130366040
Hydraulic Filter. Part Number: Metal Strainer

Change engine oil and filter. Service lubrication system components.

Install a new air filter element.

Install a new hydraulic filter.

Change transmission/hydraulic oil.

Drain water from fuel tank and replace fuel filter.

Clean oil cooler fins and radiator.

Drain, flush and refill engine cooling system. Cooling System Capacity - 3.8 qt (3.6 L).

Check all clamps and hoses.

Check battery electrolyte level.

Check engine valve clearance.

Inspect and adjust fuel injectors.