________________________________________________________________________________

Ford 3610 Maintenance Information

Ford 3610 Periodic Maintenance

Every Ten Hours or Daily Inspection

Engine oil level checking. If the engine oil level is low, fill in fresh oil.

Transmission/hydraulic oil level checking. When the transmission/hydraulic fluid is low, fill the required volume.

Check primary and secondary air filter element. Change if necessary.

Check radiator coolant level. If the coolant level is too low, add coolant in cooling system.

Check engine speed, steering system, hand brake and service brakes. If damages are found, repair it.

Oil And Filter Change

Every 300 Hours

Replace engine oil. Engine oil type - SAE 15W-40, 10W-30, 15W-30, SAE 10W. Engine oil capacity: 7 qt (6.6 L). Add oil to the upper mark on the dipstick.

Changing engine oil filter. Engine oil filter part number: 86546614 or E8NN6714AA. Before replacement procedure, clean the filter housing from dirt. After installing a new filter, check the oil level. Add oil if necessary.

Check and clean the engine fuel filter.

Engine air filter elements checking. Service as required.

Lubricate front and rear axle hub bearings.

Every 600 Hours

Changing steering oil. Recommended steering fluid type - 134D, SAE 10W-30. Steering fluid capacity: 1.9 qt (1.8 L). Check steering fluid level after replacement.

Power steering filter replacement. Steering filter part number: EDPN3K758A.

Replacing engine air filter elements. Air filter part number - 84493216 or 86525008, E9NN9B618AA or D6NN9601B.

Every 1200 Hours

Change fuel filter. Fuel filter part number - 84535312 or EDPN9N074AA. Check diesel fuel pump adjustment.

Changing transmission oil. Recommended transmission fluid type - 134D, SAE 10W-30. Transmission fluid capacity: 3.1 gal (11.5 L) with 8x2 transmission, 2.5 gal (9.5 L) with 8x4 transmission. Check transmission fluid level after replacement.

Changing hydraulic oil. Hydraulic fluid type - 134D, SAE 10W-30. Hydraulic fluid capacity: 6.2 gal (23.3 L). Check hydraulic oil level after replacement.

Replace hydraulic filter element. Hydraulic filter element part number - 84518613 or D6NNB486A. Check the hydraulic fluid level after installing a new filter. If required, add it.

Annual Maintenance

Ford 3610 replacement parts

Engine Air Filter. Part Number (Primary, Secondary): 84493216 or 86525008, E9NN9B618AA or D6NN9601B
Engine Oil Filter. Part Number: 86546614 or E8NN6714AA
Engine Fuel Filter. Part Number: 84535312 or EDPN9N074AA
Hydraulic Filter. Part Number: 84518613 or D6NNB486A
Power Steering Filter. Part Number: EDPN3K758A

Change filter and engine oil. Service lubricating system components.

Install new air cleaner elements.

Change hydraulic fluid and hydraulic filter.

Change transmission fluid.

Change steering oil and power steering filter.

Change the fuel filter, but drain water from fuel tank first.

Clean radiator and oil cooler fins.

Drain, flush and refill engine cooling system. Cooling System Capacity - 11 qt (10.4 L).

Check all hoses and clamps.

Check and service the battery.

Check and adjust valve clearance.

Check and adjust injection pump.