________________________________________________________________________________
Ford 1100 Maintenance Data
Ford 1100 Periodic Maintenance
Every Ten Hours or Daily Checking
Motor oil level checking. If after checking the oil level is low, add
it.
Check transmission/hydraulic fluid level. If transmission/hydraulic oil
is too low, add recommended volume.
Check air filter element. Replace with a new one if necessary.
Check radiator coolant level. If the coolant level is too low, add
coolant in cooling system.
Check engine speed, steering, service brakes and hand brake. If
malfunctions are found, repair it.
Oil Change And Filter Replacement
Every 100 Hours
Change engine oil. Recommended motor oil type - SAE 10W-40, 15W-40,
10W-30, SAE 20W-20. Lubricating system capacity - 3.2 qt (3 L). Check
motor oil level after changing.
Clean engine air filter. Change if required. Engine air filter part
number: 86512887
Service engine fuel filter element. Engine fuel filter part number:
SBA130366040
Lubricate the front axle wheel bearings.
Every 200 Hours
Engine oil filter replacement. Oil filter part number: 84476642 /
E1NN6714AB. When replace the filter, flushing the housing is necessary.
When the filter is replaced, check the oil level. If necessary, add it.
Replace fuel filter. Fuel filter part number - SBA130366040. Check the
correct operation of injection pump.
Every 300 Hours
Transmission/hydraulic fluid change. Recommended transmission/hydraulic
fluid: 134D, SAE 10W-30. Fluid capacity: 5 gal (18.9 L). When the
procedure is complete, check the transmission/hydraulic oil level.
Transmission/hydraulic oil filter replacement. After replacing the
filter, check the transmission/hydraulic oil level. If after checking
the oil level is low, add it.
Front axle fluid change. Front Axle Capacity - 1.8 qt (1.6 L). Front
Axle Oil Type - 134D, Gearlube 80W-90.
Yearly Maintenance
Ford 1100 replacement parts
Engine Air Filter. Part Number: 86512887
Engine Oil Filter. Part Number: 84476642 / E1NN6714AB
Engine Fuel Filter. Part Number: SBA130366040
Hydraulic Filter. Part Number: Metal Strainer
Replace filter and engine oil. Check and clean the oil system.
Change air cleaner element.
Change hydraulic oil and clean the filter.
Replace the fuel filter, but drain water from fuel tank first.
Clean oil cooler fins and radiator.
Flush the cooling system and refill with fresh coolant. Cooling System
Capacity - 3.2 qt (3 L).
Inspect all clamps and hoses.
Check battery electrolyte level.
Check and adjust valve clearance.
Inspect and adjust diesel fuel pump.
________________________________________________________________________________
________________________________________________________________________________________
FORD TRACTORS SPECIFICATIONS |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
FORD TRACTORS MAINTENANCE |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________