________________________________________________________________________________

Ford 1300 Inspection and Maintenance

Ford 1300 Service Intervals

Every 10 Hours or Daily Checking

Check engine oil level. If the engine oil level is low, add fresh oil.

Transmission/hydraulic fluid level checking procedure. When the transmission/hydraulic fluid is low, fill the required volume.

Checking air filter element. Install a new filter if required.

Check the coolant level. If the coolant level is low, top it up.

Check engine speed, steering unit, parking brake and service brakes. Repair any damage if necessary.

Oil Change And Filter Replacement

Every 100 Hours

Engine oil change. Engine oil type - SAE 10W-40, 15W-40, 10W-30, SAE 20W-20. How much to change: Engine Oil Capacity - 4.5 qt (4.3 L). When the procedure is complete, check the engine oil level.

Engine air filter element checking. Replace as required. Engine air filter part number: 86512887.

Check and service engine fuel filter element.

Lubricate the front axle bearing assembly.

Every 200 Hours

Replace engine oil filter. Engine oil filter part number: 84476642 / E1NN6714AB. When replace the filter, flushing the housing is necessary. After installation, checking the oil level is recommended. Add oil if required.

Change fuel filter. Fuel filter part number - SBA130366040. Check the correct operation of injection pump.

Every 300 Hours

Change transmission/hydraulic oil. Recommended fluid type: 134D, SAE 10W-30. Transmission/hydraulic system capacity: 5.3 gal (20 L). After changing the transmission/hydraulic oil, check the level with a dipstick.

Replacing hydraulic fluid filter. When installation is complete, check the transmission/hydraulic oil level. Add oil if necessary.

Change front axle lubricant. Front Axle Oil Type - 134D, Gearlube 80W-90. Front Axle Capacity - 1.8 qt (1.6 L).

Annual Maintenance

Ford 1300 replacement parts

Engine Air Filter. Part Number: 86512887
Engine Oil Filter. Part Number: 84476642 / E1NN6714AB
Engine Fuel Filter. Part Number: SBA130366040
Hydraulic Filter. Part Number: Metal Strainer

Change filter and engine oil. Check and clean the oil system.

Replace air cleaner element.

Install a new transmission/hydraulic filter.

Change transmission/hydraulic fluid.

Replace the fuel filter, but drain water from fuel tank first.

Clean oil cooler fins and radiator.

Flush the cooling system and add fresh coolant. Cooling System Capacity - 4.2 qt (4 L).

Inspect all hoses and clamps.

Check level of battery electrolyte.

Check and adjust valve clearance.

Check and adjust injection pump.