________________________________________________________________________________

John Deere GT245 Specs

John Deere GT245 Engine Specifications

Engine Make - Kawasaki
Engine Model Number - FH601V
Type - Forced air-cooled, vertical shaft, OHV, 4-stroke gasoline engine
Horsepower - 14.9 kW (20 hp)
Cylinders - V-Twin
Cycle - Four
Bore x Stroke - 75.2 mm x 76 mm (2.96 in x 2.99 in)
Piston displacement - 675 mL (41.19 cu.in)
Direction of rotation - Counterclockwise facing the PTO shaft
Compression release - Automatic compression release
Cooling - Type Air
Oil filter - Cartridge type full flow filter
Air Cleaner - Paper Element with Foam Precleaner
Spark plug - NGK BPR4ES
Spark Plug Gap - 0.75 mm (0.030 in.)
Spark Plug Torque - 20 Nm (15 lb-ft)
Low idle speed - 1550 rpm
Fast idle speed - 3600 rpm
Ignition system - Transistorized-fly wheel magneto
Starting system - Electric starter and/or recoil starter
Charging system 12 V - 13 amps with regulator
Carburetor - Float type, fixed main jet, two barrel
Fuel pump - Diaphragm type pulse pump
Governor - Flyweight all speed governor
Lubrication system - Pressure feed by positive displacement pump
Battery Voltage - 12 V
CCA - 500 Amp
Reserve Capacity - 85 minutes
BCI Group Size - 51

John Deere GT245 Drivetrain

Transmission Type - Hydrostatic
Transaxle - Tuff Torq K71
Number of Speeds - Infinite
Drain Plug Torque - 15 Nm (133 lb-in.)
Travel Forward Speeds at Full Engine RPM - 0-11 km/h (0-7 mph)
Travel Reverse Speeds at Full Engine RPM - 0-6 km/h (0-4 mph)
Transmission Capacity - 4.4 L (4.6 qt)
Oil type - Low Viscosity HY-GARD
Steering - Open Sector and Pinion
Brakes - Internal Wet Disc

JD GT245 Tires

Front Tires - 16x6.50-8
Rear Turf Type Tires - 23x10.50-12
Rear Bar Type Tires - 23x10.50-12
Inflation Front - 70-97 kPa (10-14 psi)
Inflation Rear Turf Type - 56-70 kPa (8-10 psi)
Inflation Rear Bar Type - 56-140 kPa (8-20 psi)

John Deere GT245 Dimensions

Overall Height - 119.4 cm (47.0 in.)
Overall Length - 182.9 cm (72.0 in.)
Overall Width (Narrow Wheel Spacing) - 99.1 cm (39.0 in.)
Overall Width (Wide Wheel Spacing) - 105.4 cm (41.5 in.)
Turning Radius - 1.7 ft. (50 cm)
Operating Weight (Without Mower or Fuel) - 265 kg (585 lb)

JD GT245 Attachments

42C Mower Deck

Mower Type - Mulch, Bag or Side Discharge
Cutting Blades - 2
Mower Weight - 37 kg (82 lb)
Blade Bolt Torque - 75 Nm (55 lb-ft)
Cutting Width - 106.7 cm (42 in.)
Cutting Height (approximate) - 25-102 mm (1-4 in.)
Height Adjustment - 13-Position, 6.35 mm (1/4 in.)

44-Inch Mower Deck

Type - Mid-mount 3-blade
Cutting Width - 44 in. (111 cm)
Weight - 125 lbs (56 kg)
Overall Width - 45.7 in. (116 cm)
Cut Height - 1 to 4 in. (2 to 10 cm)

48C Mower Mower Deck

Mower Type - Mulch, Bag or Side Discharge
Cutting Blades - 3
Mower Weight - 53 kg (117 lb)
Blade Bolt Torque - 68 Nm (50 lb-ft)
Cutting Width - 121.9 cm (48 in.)
Cutting Height (approximate) - 25-102 mm (1-4 in.)
Height Adjustment - 13-Position, 6.35 mm (1/4 in.)

54C Mower Mower Deck

Mower Type - Mulch, Bag or Side Discharge
Cutting Blades - 3
Mower Weight - 67 kg (148 lb)
Blade Bolt Torque - 68 Nm (50 lb-ft)
Cutting Width - 137.2 cm (54 in.)
Cutting Height (approximate) - 25-102 mm (1-4 in.)
Height Adjustment - 13-Position, 6.35 mm (1/4 in.)

JOHN DEERE TRACTORS ATTACHMENTS
420	430	455	790	990
X300	X320	X330	X350	X475
X485	X500	X540	X570	X590
X700	X720	X738	X758	1023E
2025R	2210	2520	3025E	3032E
3038E	3038R	3039R	3046R	3203
3320	3520	4052R	4066R	4100
4105	4115	4200	4310	4320
4400	4410	4520	4600	4720

JD TRACTORS TROUBLESHOOTING
2640	3040	3310	3650	4100
5050D	5090R	5410	6105R	7200R
E130	L111	LA110	LT155	X300R