________________________________________________________________________________

John Deere LT133 Lawn Tractor Specs

JD LT133 Engine Specifications

Engine Make - Kohler
Engine Model - CV13S-21525
Horsepower 9.7 kW (13 hp)
Cylinders - One
Cycle - Four
Power (@ 3600 RPM, corrected to SAE J1995) - 9.75 kW (13 HP)
Max Torque (@ RPM indicated) - 27.8 Nm (20.5 ft. lb.) @ 2500
Bore - 87 mm (3.43 in.)
Stroke - 67 mm (2.64 in.)
Displacement - 398 cc (24.3 cu. in.3)
Compression Ratio - 8.5:1
Weight (approx.) - 39.54 kg (87 lb.)
Oil Capacity (approx.) - 1.9 L (2.0 U.S. qt.)
Fuel Type - Gasoline
Fuel Filter - In-line
Fuel Pump - Mechanical
Carburetor - Walbro or Nikki
Crankcase without oil filter - 1.4 L (1.5 qt.)
Crankcase with oil filter - 1.8 L (1.9 qt.)
Fuel - 7.5 L (2.0 gal.)
Balance Shaft - 0.0575/0.3625 mm (0.0027/0.0137 in.)
Balance Shaft Bearing Surface - 19.959 mm (0.7858 in.)
Camshaft - 0.088/0.393 mm (0.003/0.015 in.)
Carburetor (Preliminary Low Idle Fuel Needle Setting) - 1 Turn
Fuel Bowl Retaining Screw Torque - 5.1-6.2 Nm (45-55 in. lb.)
Cylinder Bore - 87.000/87.025 mm (3.4252/3.4262 in.)
Spark Plug Type - Champion RC12YC (Standard) or Premium Gold 2071 (Pro Series)
Spark Plug Gap 1 mm (0.040 in.)
Spark Plug Torque 40 Nm (30 lb-ft.)
Hydraulic Valve Lifter to Crankcase Running Clearance - 0.0124/0.0501 mm (0.0005/0.0020 in.)
Intake Valve Stem-to-Valve Guide Running Clearance - 0.038/0.076 mm (0.0015/0.0030 in.)
Exhaust Valve Stem-to-Valve Guide Running Clearance - 0.050/0.088 mm (0.0020/0.0035 in.)
Intake Valve Guide - 7.134 mm (0.2809 in.)
Exhaust Valve Guide I.D - 7.159 mm (0.2819 in.)
Valve Guide Reamer Size STD - 7.048 mm (0.2775 in.)
Intake Valve Minimum Lift - 8.96 mm (0.353 in.)
Exhaust Valve Minimum Lift - 9.14 mm (0.360 in.)
Battery Type - 12 Volt
Cold Cranking Capacity - 160 Amps

PTO

Front PTO - Independent
Clutch - Manual

John Deere LT133 Transmission

Transmission Type - Gear
Transaxle - Dana 4360
Type - Five-Speed/Linear Shift
Speeds - 5 Forward, Neutral and Reverse
Diameter Input Shaft - 5/8 in.
Clockwise input rotation
Axles - 3/4 in. dia. x 5-3/4 in. long, keyed w/snap ring groove
Mounting centers - 1-3/4 in. x 13 in.
Overall dimensions - 10-1/2 in. x 32-3/4 in. x 5-3/4 in.
Disc brake - External
Parking brake - Yes
Keyed axles with snap ring groove
Overall axle length approx - 30-3/4 in.

Travel Speeds

First Gear - 2.5 km/h (1.6 mph)
Second Gear - 3.3 km/h (2.1 mph)
Third Gear - 5.2 km/h (3.2 mph)
Fourth Gear - 6.6 km/h (4.1 mph)
Fifth Gear - 8.5 km/h (5.3 mph)
Reverse Gear - 3.9 km/h (2.4 mph)

Wheels

Drive Wheels - 4x2, 2WD
Steering Configuration - Manual

John Deere LT133 Mowers

Model - 38-Inch Mower Deck
Cutting Width - 96.5 cm (38 in.)
Overall Width - 132.1 cm (52 in.)
Net Weight - 33 kg (72 lbs.)
Cutting Blades - 2
Blade Bolt Torque - 53 Nm (39 lb-ft.)
Cutting Height (approximate) - 25 to 100 mm (1 to 4 in.)
Height Adjustment - 13 position, 6.35 mm (1/4 in.) increments

JD LT133 Tire Size

Front Tire Size, 2WD - 15 x 6.00 - 6
Rear Tire Size - 20 x 10.0 - 8
Inflation - Front 83 kPa (12 psi)
Inflation - Rear 55 kPa (8 psi)

Dimensions and Weight

Overall Height - 103.1 cm (40.6 in.)
Overall Width (tractor only) - 90.2 cm (35.5 in.)
Overall Length - 172.5 cm (67.91 in.)
Net Weight (tractor only, with no fuel) - 177.8 kg (392 lbs.)

JOHN DEERE TRACTORS ATTACHMENTS
420	430	455	790	990
X300	X320	X330	X350	X475
X485	X500	X540	X570	X590
X700	X720	X738	X758	1023E
2025R	2210	2520	3025E	3032E
3038E	3038R	3039R	3046R	3203
3320	3520	4052R	4066R	4100
4105	4115	4200	4310	4320
4400	4410	4520	4600	4720

JD TRACTORS TROUBLESHOOTING
2640	3040	3310	3650	4100
5050D	5090R	5410	6105R	7200R
E130	L111	LA110	LT155	X300R