________________________________________________________________________________

John Deere X330 Specs

John Deere X330 Engine Specifications

Make - Briggs and Stratton
Model Number - 44J677
Engine Type - Gasoline
Net Power Output (HP) - 25 HP gross output
Max. RPM - 3,300
Bore - 79.25 mm (3.12 in)
Stroke - 73.4 mm (2.89 in)
Displacement - 724 cm3 (44.2 cu in.)
Cylinders - 2 (V-Twin)
Cylinder Bore - Cast iron
Cycle - Four
Fuel Filter - Replaceable paper element
Fuel Pump - Pulse
Fuel Delivery - Carburetor
Fuel Type - Regular gasoline
Cooling System - Air cooled
Air Cleaner Type - Cyclonic
Oil Capacity (qt.) - 2
Lubrication System - Full pressure
Ignition System - Electronic
Ignition Coil Air Gap - 0.20-0.30 mm (0.008-0.012 in)
Valve Clearance (Intake and Exhaust) (Cold) - 0.10-0.15 mm (0.004-0.006 in)
Spark Plug Gap - 0.75 mm (0.030 in)
Spark Plug Torque - 20 Nm (15 lb-ft)
Governor System - Mechanical
Throttle Control - Remote
Choke Control - Automatic
Charging System Amps - 16 Amp DC
Auto Compression Release - Yes
Start Type - Electric
Shaft Output - Vertical
Crankshaft - Vertical
Shaft Diameter (in.) - 1
Shaft Length (in.) - 3 5/32
Shaft Keyway (in.) - 1/4in. square
Shaft End Tapped (Diameter (in.)/Threads per inch) - 7/16–20
Shaft Rotation (From PTO Shaft Side) - CCW
Bearing Type - DU
Dimensions L x W x H (in.) - 19.08 x 17.9 x 15.47
Weight (lbs.) - 91

John Deere X330 Transmission

Transmission - Variable Speed Hydrostatic
Transaxle - Kanzaki, Tuff Torq K46
Reduction Ratio - 21.53:1
Axle Torque (rated) Nm (ft. lbs.) - 177.7 (131)
Max. Tire Diameter mm (inch) - 457 (18)
Brake Capacity Nm (ft. lbs.) @ 350 N (79 lbs) - 253 (187)
Pump/Motor Displacement cc/rev - 7/10
Max. Input Speed rpm - 3,400
Axle Shaft Size mm (inch) - 19.05 (0.75)
Max. Static Weight on Axle kg (lbs.) - 306 (675)
Weight (dry) kg (lbs.) - 12.5 (27.6)
Brake Type - Wet Disc, internal
Gears - Heat Treated Powder Metal
Differential - Automotive Type Bevel Gears
Speed Control System - Hand Control External Friction Pack and Lever Available
Bypass Valve (Roll Release) - Std
Forward Speeds at Full Engine RPM - 0-8.6 km/h (0-5.3 mph)
Reverse Speeds at Full Engine RPM - 0-6.4 km/h (0-4.0 mph)

JD X330 Mechanical

Transmission - Hydrostatic drive
Power Take-off - Independent Mid PTO
Clutch - Electric
Front axle - Cast-iron
Steering - Manual Steering
Brakes - Wet disc

Tires Sizes

Front Tires - 15x6.00-6
Rear Tires - 20x10.00-8
Front Tires Inflation - 97 kPa (14 psi)
Rear Tires Inflation - 69 kPa (10 psi)

JD X330 Dimensions

Height - 119 cm (47 in.)
Overall Width (without mower deck) - 96 cm (38 in.)
Length (Overall) - 182 cm (72 in.)
Wheelbase - 125 cm (49.4 in.)
Weight (Tractor without mower deck) - 210 kg (463 lbs)

John Deere X330 Attachments

44" Snow blower

Snow blower Type - 2-stage front-mount
Clearing width - 1110 mm (44 in.)
Lift System - Manual

42" Edge Xtra Mower

Cutting Width - 1.07 m (42 in.)
Blades - 2, Rotary
Blade Nut Torque - 88 Nm (65 lb-ft)
Cutting Height (Approximately) - 25-102 mm (1-4 in.)
Speed Rotation of the Cutting Device with 42C Mower - 2850 r/min at 3200 r/min
Sound Measurements without mower deck - 81.3 ± 1 dB (A) at 3200 r/min
Sound Measurements with 42C mower deck - 87.4 ± 1 dB (A) at 3200 r/min
Vibration Measurements without mower deck - 2.5 m/s2
Vibration Measurements with 42C mower deck - 3.0 ± 0.5 m/s2

42" Edge Mulch Mower

Cutting Width - 1.07 m (42 in.)
Blades-Rotary - 2
Blade Nut Torque - 88 Nm (65 lb-ft)
Cutting Height (Approximately) - 25-102 mm (1-4 in.)

48" Edge Xtra Mower

Cutting Width - 1.22 m (48 in.)
Blades-Rotary - 3
Blade Nut Torque - 68 Nm (50 lb-ft)
Cutting Height (Approximately) - 25-102 mm (1-4 in.)

JOHN DEERE TRACTORS ATTACHMENTS
420	430	455	790	990
X300	X320	X330	X350	X475
X485	X500	X540	X570	X590
X700	X720	X738	X758	1023E
2025R	2210	2520	3025E	3032E
3038E	3038R	3039R	3046R	3203
3320	3520	4052R	4066R	4100
4105	4115	4200	4310	4320
4400	4410	4520	4600	4720

JD TRACTORS TROUBLESHOOTING
2640	3040	3310	3650	4100
5050D	5090R	5410	6105R	7200R
E130	L111	LA110	LT155	X300R