________________________________________________________________________________

John Deere X340 Specs

JD X340 Engine Specifications

Engine Model - Kawasaki FH721V
Engine Type - Forced air-cooled, vertical shaft, OHV, 4-stroke gasoline engine.
Cylinder layout - 90 V-Twin
Bore x Stroke - 75.2 mm x 76 mm (2.96 in x 2.99 in)
Piston displacement - 675 ml (41.19 cu.in)
Direction of rotation - Counterclockwise facing the PTO shaft
Compression release - Automatic compression release
Low idle speed - 1550 rpm
Fast idle speed - 3600 rpm
Ignition system - Transistorized-fly wheel magneto
Starting system - Electric starter and/or recoil starter
Charging system - 12V - 13 amps with regulator
Battery Type - 12 Volt
Cold Cranking Capacity - 195 Amps
Spark plug - NGK BPR4ES
Carburetor - Float type, fixed main jet, two barrel
Carburetor Make/type - Nikki 621266
Fuel pump - Diaphragm type pulse pump
Fuel Capacity - 12.5 L (3.3 gal)
Air cleaner - Dual stage element, dry type
Governor - Flyweight all speed governor
Lubrication system - Pressure feed by positive displacement pump
Oil filter - Cartridge type full flow filter
Oil pressuer switch - ON-OFF switch
Oil capacity (when engine is completely dry) - 1.8 L (1.9 US-qt)
Cooling system - Forced air cooling by fan
Connecting rod small end inside diameter - 16.05 mm (0.632 in.)
Cylinder inside diameter - 75.28 mm (2.964 in.)
Cylinder bore out round - 0.056 mm (0.0022 in.)
Valve clearance - 0.075-0.125 mm (0.003-0.005 in.)
Valve seating surface width (Intake/Exaust) - 0.8-1.4 mm (0.03-0.06 in.) / 1.1-1.6 mm (0.04-0.06 in.)
Valves guide inside diameter - 6.00-6.012 mm (0.2362-0.2367 in.)
Cylinder bore diamter standard cylinder - 75.18-75.20 mm (2.960-2.961 in.)

John Deere X340 Transmission

Transmission - Variable Speed Hydrostatic
Transaxle - Kanzaki, Tuff Torq K58
Reduction Ratio - 31.44:1
Axle Torque (rated) (Nm) - 294
Max. tire size (inch) - 23
Brake Capacity (Nm) - @13.9 N Brake Arm Force 470
Pump/Motor Displacement (cc/min-1) - 7/10
Max. Input Speed (min-1) - 3400
Axle Shaft Size (mm) - 25.4
Max. Static Weight on Axle (kg) - 285
Weight (Dry) (kg) - 15.3
Brake - Wet disk, internal
Housing (Case) - Aluminum Die Casting
Differential - Automotive Type Bevel Gears
Speed Control System - Foot Control / Hand Control
Bypass Valve - Standard
Oil Reservoir - Standard
Forward Speeds at Full Engine RPM - 0-10.0 km/h (0-6.2 mph)
Reverse Speeds at Full Engine RPM - 0-5.6 km/h (0-3.5 mph)

JD X340 Tires

Front Tire - 15x6.50-8
Rear Tire - 22x11.00-10
Front Tire Inflation - 97 kPa (14 psi)
Rear Tire Inflation - 69 kPa (10 psi)

John Deere X340 Dimensions

Weight (operating) - 551 lbs (249 kg)
Length - 72 in. (1820 mm)
Width - 38.5 in. (970 mm)
Height - 43 in. (1090 mm)
2WD turning radius - 1.3 ft (400 mm)

John Deere X340 Attachments

44-inch Blade

Blade Type - Front-mount
Width - 111 cm (44 in.)
Lift height - 6 inches (15 cm)
Lift - Manual
Angle - Manual

44-inch Snow blower

Snow blower Type - 2-stage front-mount
Clearing width - 44 inches (111 cm)
Lift System - Manual

54 Edge Xtra Mower

Cutting Width - 1.37 m (54 in.)
Blades-Rotary - 3
Blade Bolt Torque - 68 Nm (50 lb-ft)
Cutting Height (Approximately) - 25-102 mm (1-4 in.)
Weight - 69 kg (153 lb)

JOHN DEERE TRACTORS ATTACHMENTS
420	430	455	790	990
X300	X320	X330	X350	X475
X485	X500	X540	X570	X590
X700	X720	X738	X758	1023E
2025R	2210	2520	3025E	3032E
3038E	3038R	3039R	3046R	3203
3320	3520	4052R	4066R	4100
4105	4115	4200	4310	4320
4400	4410	4520	4600	4720

JD TRACTORS TROUBLESHOOTING
2640	3040	3310	3650	4100
5050D	5090R	5410	6105R	7200R
E130	L111	LA110	LT155	X300R