________________________________________________________________________________

John Deere X580 Specs

John Deere X580 Engine Specifications

Engine Model - Kawasaki FS730V
Engine Type - 4-stroke, OHV, V-twin 90°
Bore - 78 mm (3.07 in.)
Stroke - 76 mm (2.99 in.)
Displacement - 726 cm 3 (44.3 cu-in)
Max. horsepower - 22.6 PS (16.6 KW; 22.2 HP) at 3,600 rpm / 24.3 PS (17.9 KW; 24.0 HP) at 3,600 rpm
Max. torque (crank PTO) - 53.7 Nm (5.5 kgm; 39.6 ft-lb) at 2,000 rpm / 54.2 Nm (5.5 kgm; 40.0 ft-lb) at 2,400 rpm
Carburetor - Internally vented with fuel shut-off solenoid
Cooling system - Air-cooling
Ignition system - Electronic spark ignition
Lubricating system - Full pressure with spin-on oil filter
Starting system - Bendix type starter
Charging system - 13A or 20A charge coil (option)
Fuel used - Unleaded gasoline (octane number 86 or higher)
Cooling system - Pressurized forced circulation type
Engine Maximum speed - 3500 ± 100 rpm
Idle speed - 1500 ± 100 rpm
Cylinder compression - 4.5 kg/cm2 (64 psi) at 500 rpm
Intake valve clearance - 0.10-0.15 mm (0.004-0.006 in)
Exhaust valve clearance - 0.10-0.15 mm (0.004-0.006 in)
Oil type - 4-stroke or an equivalent (SJ or higher class)
Recommended oil - SAE 10W-40, 10W-30
Oil capacity (with filter changed) - With oil filter: 2.1 litre / Without oil filter: 1.8 litre
Spark plug - NGK BPR4ES
Spark plug gap - 0.7-0.8 mm (0.027-0.031 in)
Ignition coil air gap - 0.2-0.4 mm (0.008-0.011 in)
Spark plug tightening torque - 22 Nm; 2.2 kgm; 16.2 ft-lb
Length, mm (in) - 500 (19.7)
Width, mm (in) - 471 (18.5)
Height, mm (in) - 391 (15.4)
Dry weight, kg (lb) - 41.0 (90.4)
Cylinder head torque - 46 Nm; 4.6 kgm; 33.9 ft-lb
Connecting rod torque - 10 Nm; 1.0 kgm; 7.4 ft-lb
Flywheel torque 56 Nm; 5.7 kgm; 41.3 ft-lb
Crankcase cover torque - 27.5 Nm; 2.75 kgm; 20.3 ft-lb
Intake manifold torque - 9 Nm; 0.9 kgm; 6.6 ft-lb
Oil drain plug torque - 7 Nm; 0.7 kgm; 5.2 ft-lb
Valve clearance lock nut - 11 Nm; 1.1 kgm; 8.1 ft-lb

JD X580 Fuel system

Fuel Filter - Replaceable paper element
Fuel Pump - Pulse
Fuel Delivery - Carburetor
Carburetor Type - Internally vented with fuel shut-off solenoid
Fuel used - Unleaded gasoline (octane number 86 or higher)
Fuel Capacity 16.7 L (4.4 gal.)

John Deere X580 Transmission

Transmission Type - Belt-driven hydrostatic
Transaxle Model - Kanzaki Tuff Torq K72A
Transaxle Type - Variable Speed Hydrostatic
Reduction Ratio - 23.37:1
Axle Torque (rated) (Nm) - 549
Max. tire size (inch) - 24
Brake Capacity (Nm) - @ 33.1 N 656
Pump/Motor Displacement (cc/min-1) - 18/23
Max. Input Speed (min-1) - 3,400
Axle Shaft Size (mm) - 25,4
Max. Static Weight on Axle (kg) - 459
Weight (Dry) (kg) - 27.5
Brake - Wet disk, internal
Housing (Case) - Aluminum Die Casting
Differential - Automotive Type Bevel Gears
Differential lock - Option
Speed Control System - Foot Control / Hand Control
Auxiliary hydraulic output - Option (For Power Steering, Lift and Others) 6.9L/min, 31bars (450psi) @ 2,000rpm
Bypass Valve - Standard
Oil Reservoir - External Reservoir
Travel Forward Speeds - 0-11.6 km/h (0-7.2 mph)
Travel Reverse Speeds - 0-8.4 km/h (0-5.2 mph)

JD X580 Mechanical

Chassis - 4x2 2WD
Differential lock - Mechanical rear
Mid PTO - Independent
Clutch - Electric
Steering - Power Steering
Brakes - Wet disc

Tire Sizes

Front Tires - 16x6.50-8 (Turf)
Rear Tires - 24x12.00-12 (HDAP)
Front Tires Pressure - 97 kPa (0.97 bar) (14 psi)
Rear Tires Pressure - 69 kPa (0.69 bar) (10 psi)

John Deere X580 Attachments

47-Inch 2-Stage Snowblower

Snowblower Type - 2-Stage
Width - 119,4 cm (47-in.)
Height of Opening - 58,4 cm (23-in.)
Housing Thickness - 14 ga (0.075-in.)
Side Panel Thickness - 7 ga (0.177-in.)
Auger Diameter - 16-in. (40,6 cm)
Auger Speed - 160 rpm at rated engine speed.
Impeller Speed - 800 rpm at rated engine speed.
Impeller Diameter - 40,6 cm (16-in.)
Lift System - Hydraulic
Lift Height - 19,1-20,3 cm (7-1/2-8 in.)
Chute Control - Hydraulic
Chute Rotation - 200 Degrees
Weight (Approximate) - 181 kg (400 lb)

48 Inch Mower

Model - Accel Deep 48 Mower Deck
Type - Mid-mount
Lift System - Hydraulic
Cutting Width - 1.22 m (48 in)
Blades-Rotary - 3
Blade Bolt Torque - 68 Nm (50 lb·ft)
Cutting Height (approximately) - 25-102 mm (1-4 in)
Deck Weights - 65 kg (143 lb)

54 Inch Mower

Model - Accel Deep 54 Mower Deck
Type - Mid-mount
Lift System - Manual
Cutting Width - 1.37 m (54 in)
Blades-Rotary - 3
Blade Bolt Torque - 68 Nm (50 lb·ft)
Cutting Height (approximately) - 25-102 mm (1-4 in)
Deck Weights - 68 kg (151 lb)

John Deere X580 Dimensions

Height - 1220 mm (48 in)
Overall Width (without mower deck) - 1040 mm (41 in)
Length - 2010 mm (79 in)
Wheelbase - 1300 mm (51.2 in.)
Operating Weight (without mower deck) - 288 kg (636 lb)

JOHN DEERE TRACTORS ATTACHMENTS
420	430	455	790	990
X300	X320	X330	X350	X475
X485	X500	X540	X570	X590
X700	X720	X738	X758	1023E
2025R	2210	2520	3025E	3032E
3038E	3038R	3039R	3046R	3203
3320	3520	4052R	4066R	4100
4105	4115	4200	4310	4320
4400	4410	4520	4600	4720

JD TRACTORS TROUBLESHOOTING
2640	3040	3310	3650	4100
5050D	5090R	5410	6105R	7200R
E130	L111	LA110	LT155	X300R