________________________________________________________________________________

John Deere X948 Specs

John Deere X948 Engine Specifications

Engine Model - Yanmar 3TNM72
Engine Type - Vertical In-line, Water Cooled, 4-Cycle Diesel Engine
No. of Cylinders - 3
Bore x Stroke - 2.83 x 2.91 in. (72 x 74 mm)
Displacement - 55.1 cu in. (0.904 L)
Max. Rated Power - 22 HP (16.5 kW)
Normal Oil Pressure at Rated Engine Speed - 34.8-63.8 psi (0.240-0.440 MPa)
Normal Oil Pressure at Low Idle Speed - 8.5 psi (0.06 MPa) or greater
Combustion System - Swirl Chamber (Ball Type)
Starting System - Electric Starting
Cooling System - Radiator
Lubricating System - Forced Lubrication with Trochoid Pump
PTO Position - Flywheel End
Direction of Rotation - Counterclockwise Viewed from Flywheel End
Aspiration - Natural
Electric Starting - Starter Motor: DC12V, 1.6 hp (1.2 kW)
Dynamo: DC12V, 20A
Recommended Battery Capacity: 12V, 36 Amp-Hour (5h rating)
Dimensions (LxWxH) - 19.5 x 16.8 x 21.3 in. (497 x 427 x 542 mm)
Engine Coolant Capacity - 0.26 gal (1.0 L)
Standard Cooling Fan - 12.2 in. (310 mm) O.D., 5 Blade Pusher-Type
Crank / Fan V-pulley Dia. - 3.9 / 3.5 in.(100 mm / 90 mm)
Intake / Exhaust Valve Gap - 0.006-0.010 in (0.15-0.25 mm)
Thermostat - Full Opening Lift Temperature

JD X948 Power Take-off

Rear PTO - Independent
Rear RPM - 540
Mid PTO - Independent
Clutch - Electro-hydraulic
Mid RPM - 2000

John Deere X948 Drive Train

Transmission Type - Hydrostatic
Drive System - Twin Touch Foot Pedals, 4-Wheel Drive
Number of Speeds - Infinite
Mid-mounted PTO Drive Speeds - 2000 rpm
Rear PTO (if equipped) Drive Speeds - 540 rpm
Forward Speeds - 0 to 13,7 km/h (0 to 8,5 mph)
Reverse Speeds - 0 to 8,1 km/h (0 to 5,0 mph)
Brakes Type - Internal wet disc
Steering - Hydrostatic power, 6-position tilt steering wheel
Steering Type - 2 Front Wheel Steer
Turning Radius, cm (in) - 60,0 (23,6)

JD X948 Tire Sizes

Front Tire - 18x8.50-10, Turf, 4PR
Rear Tire - 26x12.00-12, Turf, 4PR
Front Tire Pressures - 69-103 kPa
Rear Tire Pressures - 41-69 kPa

Capacities

Fuel Tank - 19.7 L (5.2 gal.)
Four-Wheel Steer Transaxle (with filter) - 5.6 L (6.0 qt.)
HFWD System Transaxle (with filter) - 6.8 L (7.2 qt.)
Cooling System - 2.8 L (3.0 qt.)
Engine Oil (with filter) - 3.2 L (3.4 qt.)
Full Time 4WD (HFWD) Front Drive Axle - 5.0 L (5.3 qt.)

John Deere X948 Attachments

48" Mower Deck

Mower Deck Type - Stamped Steel, Rolled Edges
PTO Engagement - Electric Drive Clutch
Deck Lift / Lower - Hydraulic
Cutting Height - 25-133 mm (1-5.25 in.) increments 6 mm / 0.25 in
Cutting Width - 1220 mm (48 in.)
Number of Blades - 2
Pre-Set Height of Cut - Std

54" Mower Deck

Mower Deck Type - Stamped Steel, Rolled Edges
PTO Engagement - Electric Drive Clutch
Deck Lift / Lower - Hydraulic
Cutting Height - 25-133 mm (1-5.25 in.) increments 6 mm / 0.25 in
Cutting Width, cm (in.) - 1370 mm (54 in.)
Number of Blades - 2
Pre-Set Height of Cut - Standard

60" Mower Deck

Mower Deck Type - Stamped Steel, Rolled Edges
PTO Engagement - Electric Drive Clutch
Deck Lift / Lower - Hydraulic
Cutting Height - 25-133 mm (1-5.25 in.) increments 6 mm / 0.25 in
Cutting Width, cm (in.) - 1520 mm (60 in.)
Number of Blades - 2
Pre-Set Height of Cut - Standard

John Deere X948 Dimensions

Length - 1905 mm (75 in.)
Height without cab, ROPs folded - 1611 mm (64.4 in.)
Height without cab, ROPs up - 1982 mm (78 in.)
Height with cab - 1888 mm (74.3 in.)
Weight, no fuel or Mower Deck - 513 kg (1132 lb)
Width w/o Deck - 1194 mm (47 in.)
Ground Clearance - 180 mm (7.1 in.)
Wheelbase - 1415 mm (55.7 in.)

JOHN DEERE TRACTORS ATTACHMENTS
420	430	455	790	990
X300	X320	X330	X350	X475
X485	X500	X540	X570	X590
X700	X720	X738	X758	1023E
2025R	2210	2520	3025E	3032E
3038E	3038R	3039R	3046R	3203
3320	3520	4052R	4066R	4100
4105	4115	4200	4310	4320
4400	4410	4520	4600	4720

JD TRACTORS TROUBLESHOOTING
2640	3040	3310	3650	4100
5050D	5090R	5410	6105R	7200R
E130	L111	LA110	LT155	X300R