________________________________________________________________________________

John Deere 2020 Troubleshooting

John Deere 2020 Diesel Engine Troubleshooting

Engine starts hard or will not start: Fuel filter plugging. Service or replace the filter. Air in the fuel lines. Bleed the fuel lines. Fuel injection nozzles are faulty or clogged. Inspect nozzles and replace if necessary. Fuel injection pump is defective. Replace or rebuild injection pump.

Engine stalls while running: Improper fuel injection timing. Adjust fuel injection pump as required. Fuel filter plugged. Clean the filter element. Engine is not preheated. Engine is not warmed up to the required temperature.

Engine starts but stalls suddenly: Fuel filter element clogging. Change filter element. Fuel injection pump is not operating properly. Install a new pump or rebuild. Clogged air cleaner. Install new air filter element.

Engine overheating: Dirty radiator fins or faulty radiator cap. Replace cap or clean radiator. Not enough coolant. Top up coolant fluid and check system for leaks. Excessive wear of the fan belt. Replace the fan belt. Lack of engine oil. Add oil to the engine crankcase.

Engine loses power: Fuel injection nozzles are damaged or dirty. Clean or change injection nozzles. Dirty fuel hoses or lines. Clean fuel system lines and hoses. Dirty air filter. Service air cleaner. Cylinder head gasket is worn. Install new cylinder head gasket.

Engine knocks or noises: Engine not warmed up. Warm up engine as required. Low engine oil level. Checking oil level and add if necessary. Fuel injection pump timing is wrong. Adjust the pump as required. Pistons are broken or worn. Replace the pistons. Faulty or misaligned connecting rod. Align or replace connecting rod.

Engine stops at idle: Incorrect low idle speed adjustment. Adjustment required. The valve clearance is incorrect. Adjust valve clearance according to specifications. Fuel injection pump is defective. Rebuild or change fuel pump.

Low oil pressure: Engine oil level low. Fill up the engine oil. Oil pump failure. Remove and inspect oil pump. Dirty oil filter. Service or replace engine oil filter.

John Deere 2020 Transmission Troubleshooting

Transmission makes excessive noise: Improper backlash or worn gears. Adjust backlash correctly or replace the gears. Shift forks are worn or bent. Replace defective shift forks. Worn or stuck shaft splines. Change the shaft. Insufficient transmission fluid. Check and refill the transmission fluid. Worn or damaged bearings. Replace faulty bearings. Transmission oil is dirty. Transmission oil change required.

Difficult to shift gears: Gear shift linkage is worn or rusty. Lubricate or replace the shift linkage. Worn or unadjusted clutch. Adjust clutch or replace if required. Shift forks are worn or bent. Replace the shift forks. Worn gear shifting mechanism. Repair or change worn components if necessary.

Transmission oil pressure is insufficient: Lack of transmission fluid. Checking transmission fluid level and add if necessary. Plugged transmission oil filter (if equipped). Clean or change transmission oil filter. Relief valve is damaged. Replace valve as required.

Transmission oil leaking: Damaged gaskets or seals. Gaskets or seal replacement required. High transmission fluid level. Drain the excess fluid.

John Deere 2020 Hydraulics Troubleshooting

Excessive hydraulic system heat: Incorrect hydraulic fluid type. Fill up with the proper type of fluid. Hydraulic fluid contamination. Change hydraulic fluid. Air in the hydraulic system. Air bleeding. Main relief valve malfunctioning. Relief valve replacement required.

Hydraulic fluid pressure too low: Hydraulic oil is insufficient. Checking hydraulic oil level and add if necessary. Dirty hydraulic fluid filter element. Change hydraulic filter element or clean if necessary. Hydraulic piping is leaking. Inspect hydraulic system for leaks and repair it. Hydraulic control valve block is out of adjustment. Control valve needs to be adjusted. Hydraulic pump is faulty. Install a new hydraulic fluid pump. Hydraulic cylinder not working. Install a new hydraulic cylinder or repair it.

Hitch not lifting or hitch lifts slowly: Damaged hydraulic pump. Repair or replace hydraulic fluid pump. Main relief valve is defective. Change relief valve. Damaged hydraulic control valve. Install a new hydraulic valve or repair it. Hydraulic cylinder not working. Repair or replace hydraulic cylinder. Low hydraulic oil level. Fill the system to proper hydraulic oil level. Clogged hydraulic fluid filter. Replace hydraulic filter element or service if necessary. Excessive loading on the hitch. Reduce loading.

3-point hitch can't drop or drops too slowly: Hydraulic cylinder not working. Replace or repair hydraulic cylinder. Incorrect setting hydraulic spool valve. Use the correct setting. Hitch cross shaft is worn. Change the shaft. Three-point hitch is out of adjustment. Adjust as required.

3-point hitch jerks when lower or lift: Hydraulic oil is dirty. Hydraulic oil change required. Hydraulic pump malfunction. Replace or repair hydraulic oil pump. Air in hydraulic system. Bleed air from hydraulic system. Hydraulic control valve is faulty. Repair or replace the valve. Hydraulic cylinder not working. Repair or install a new hydraulic cylinder.

John Deere 2020 Steering System Troubleshooting

Steering wheel free play is excessive: Steering column coupling or shaft is worn. Change defective part. Damaged hydraulic steering pump. Steering pump needs to be repaired or replaced. Steering linkage parts are loose or worn. Repair or replace steering linkage. Faulty or worn steering valve. Inspect and change as required.

Steering wheel is very heavy to turn: Air lock in the steering system. Bleed air from system. Clogged steering filter. Service or replace the steering filter. Steering oil level is low. Fill up steering oil to required level. Steering valve has wear or malfunction. Inspect and change as required. Damaged hydraulic steering pump. Steering pump needs to be replaced or repaired. Steering pump control valve is faulty or stuck. Change or flush control valve. Incorrectly fitted or worn steering column. Refit or replace the steering column. Tire pressure is uneven. Adjust the tire pressure. Improper toe-in. Check and adjust toe-in. Steering cylinder is leaking. Replace worn seal sleeves or damaged piston rod.

Front wheels wander to left or right: Worn or defective steering valve. Inspect and replace as required. Steering cylinder failure. Repair or change steering cylinder. Improper toe-in. Check and adjust toe-in. Steering linkage joints are worn or loose. Inspect and change as required. Incorrectly adjusted or damaged front wheel bearings. Replace the bearings or adjust it properly. Tire pressure uneven. Inflate the tires correctly.

John Deere 2020 Electrical System Troubleshooting

Battery does not charge: Loose or corroded electrical wiring connections. Tighten or service cable connections. Faulty battery terminal connectors. Replace terminal connectors. Faulty cell in battery. Battery replacement required. Worn or loose belt. Belt needs to be adjusted or replaced.

Starter turning slow: Low battery voltage. Recharge the battery. Battery will not hold charge. Service charging system or change battery. Disconnected battery cables or bad terminals. Check wiring and clean or replace terminals.

Starter motor won't turn: Battery is drained or worn. Charge or replace the battery. Wiring is incorrectly connected or disconnected. Inspect wiring and connect correctly. Low battery capacity. Battery is drained, charge it. Starter motor is defective. Repair or change starter.

JOHN DEERE TRACTORS ATTACHMENTS
1023E	2025R	2210	2520	3032E
3046R	3520	4066R	4105	4200
4320	4400	4520	4600	4720
430	420	455	X300	X350
X485	X500	X590	X700	X738

JOHN DEERE TRACTORS TROUBLESHOOTING
2640	3040	3310	3650	4100
5050D	5090R	5410	6105R	7200R
E130	L111	LA110	LT155	X300R